ACP console log opened 02-Dec-2015 04:41:12 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:41:12 This is AcquireScheduler V3.5.2
04:41:12 Custom image file path/names are in use
04:41:12 Custom auto-flip parameters are in use
04:41:12   PreFlip=300 PostFlip=120 AF=300 PU=60
04:41:12 Hardware GEM pier side reporting is available.
04:41:13 Initializing AcquireSupport V6.0.7
04:41:13 Weather safe, server is Boltwood Cloud Sensor II
04:41:13 Telescope is ACP->ACP->TMO61, driver V3
04:41:13 Dome is MaxDome
04:41:13 MaxIm DL/CCD is version 5.18
04:41:13 Imager is QSI Universal
04:41:13 Imager readout modes:
04:41:13   0 is Image Quality
04:41:13 Guider is SX Universal(internal/off-axis)
04:41:13 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:41:13 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:41:13 Using focus offsets from FilterInfo.txt
04:41:13 ACPS Observation Z_Tau(1 of 1)
04:41:13   (belongs to Project Mogul_Mira, Plan Z_Tau)
04:41:13   (turning on sidereal tracking)
04:41:13 Pointing updates are enabled
04:41:13   Start slew to Z_Tau...
04:41:34 **Script Error (Tracking has been stopped)**
04:41:34 Source:  ASCOM.SiTechDll.Telescope
04:41:34 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
04:41:34 Script Context:
04:41:34     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
04:41:34     1739:         End If
04:41:34     1740:     Else
04:41:34 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
04:41:34                   ^
04:41:34     1742:     End If
04:41:34     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
04:41:34     1744:     
04:41:34 -- end --
ACP console log closed 02-Dec-2015 04:41:34 UTC