ACP console log opened 02-Dec-2015 04:43:24 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:43:24 This is AcquireScheduler V3.5.2
04:43:24 Custom image file path/names are in use
04:43:24 Custom auto-flip parameters are in use
04:43:24   PreFlip=300 PostFlip=120 AF=300 PU=60
04:43:24 Hardware GEM pier side reporting is available.
04:43:25 Initializing AcquireSupport V6.0.7
04:43:25 Weather safe, server is Boltwood Cloud Sensor II
04:43:25 Telescope is ACP->ACP->TMO61, driver V3
04:43:25 Dome is MaxDome
04:43:25 MaxIm DL/CCD is version 5.18
04:43:25 Imager is QSI Universal
04:43:25 Imager readout modes:
04:43:25   0 is Image Quality
04:43:25 Guider is SX Universal(internal/off-axis)
04:43:25 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:43:25 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:43:25 Using focus offsets from FilterInfo.txt
04:43:25 ACPS Observation T_Ori(1 of 1)
04:43:25   (belongs to Project AAVSO_Monitoring, Plan T_Ori)
04:43:25   (turning on sidereal tracking)
04:43:25 Pointing updates are enabled
04:43:25   Start slew to T_Ori...
04:43:26 **Script Error (Tracking has been stopped)**
04:43:26 Source:  ASCOM.SiTechDll.Telescope
04:43:26 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
04:43:26 Script Context:
04:43:26     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
04:43:26     1739:         End If
04:43:26     1740:     Else
04:43:26 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
04:43:26                   ^
04:43:26     1742:     End If
04:43:26     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
04:43:26     1744:     
04:43:26 -- end --
ACP console log closed 02-Dec-2015 04:43:26 UTC