ACP console log opened 02-Dec-2015 05:50:38 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
05:50:38 This is AcquireScheduler V3.5.2
05:50:38 Custom image file path/names are in use
05:50:38 Custom auto-flip parameters are in use
05:50:38   PreFlip=300 PostFlip=120 AF=300 PU=60
05:50:38 Hardware GEM pier side reporting is available.
05:50:39 Initializing AcquireSupport V6.0.7
05:50:39 Weather safe, server is Boltwood Cloud Sensor II
05:50:39 Telescope is ACP->ACP->TMO61, driver V3
05:50:39 Dome is MaxDome
05:50:39 MaxIm DL/CCD is version 5.18
05:50:39 Imager is QSI Universal
05:50:39 Imager readout modes:
05:50:39   0 is Image Quality
05:50:39 Guider is SX Universal(internal/off-axis)
05:50:39 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
05:50:39 Calculated field of view (arcmin): H = 18.4 V = 13.8
05:50:39 Using focus offsets from FilterInfo.txt
05:50:39 ACPS Observation T_CMi(1 of 1)
05:50:39   (belongs to Project Mogul_Mira, Plan T_CMi)
05:50:39   (turning on sidereal tracking)
05:50:39 Pointing updates are enabled
05:50:39   Start slew to T_CMi...
05:50:40 **Script Error (Tracking has been stopped)**
05:50:40 Source:  ASCOM.SiTechDll.Telescope
05:50:40 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
05:50:40 Script Context:
05:50:40     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
05:50:40     1739:         End If
05:50:40     1740:     Else
05:50:40 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
05:50:40                   ^
05:50:40     1742:     End If
05:50:40     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
05:50:40     1744:     
05:50:40 -- end --
ACP console log closed 02-Dec-2015 05:50:40 UTC