ACP console log opened 02-Dec-2015 06:34:05 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
06:34:05 This is AcquireScheduler V3.5.2
06:34:05 Custom image file path/names are in use
06:34:05 Custom auto-flip parameters are in use
06:34:05   PreFlip=300 PostFlip=120 AF=300 PU=60
06:34:05 Hardware GEM pier side reporting is available.
06:34:06 Initializing AcquireSupport V6.0.7
06:34:06 Weather safe, server is Boltwood Cloud Sensor II
06:34:06 Telescope is ACP->ACP->TMO61, driver V3
06:34:06 Dome is MaxDome
06:34:06 MaxIm DL/CCD is version 5.18
06:34:06 Imager is QSI Universal
06:34:06 Imager readout modes:
06:34:06   0 is Image Quality
06:34:06 Guider is SX Universal(internal/off-axis)
06:34:06 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
06:34:06 Calculated field of view (arcmin): H = 18.4 V = 13.8
06:34:06 Using focus offsets from FilterInfo.txt
06:34:06 ACPS Observation TT_Mon(1 of 1)
06:34:06   (belongs to Project Mogul_Mira, Plan TT_Mon)
06:34:06   (turning on sidereal tracking)
06:34:06 Pointing updates are enabled
06:34:06   Start slew to TT_Mon...
06:34:07 **Script Error (Tracking has been stopped)**
06:34:07 Source:  ASCOM.SiTechDll.Telescope
06:34:07 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
06:34:07 Script Context:
06:34:07     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
06:34:07     1739:         End If
06:34:07     1740:     Else
06:34:07 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
06:34:07                   ^
06:34:07     1742:     End If
06:34:07     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
06:34:07     1744:     
06:34:07 -- end --
ACP console log closed 02-Dec-2015 06:34:07 UTC