ACP console log opened 02-Dec-2015 04:39:43 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:39:43 This is AcquireScheduler V3.5.2
04:39:43 Custom image file path/names are in use
04:39:43 Custom auto-flip parameters are in use
04:39:43   PreFlip=300 PostFlip=120 AF=300 PU=60
04:39:43 Hardware GEM pier side reporting is available.
04:39:44 Initializing AcquireSupport V6.0.7
04:39:44 Weather safe, server is Boltwood Cloud Sensor II
04:39:44 Telescope is ACP->ACP->TMO61, driver V3
04:39:44 Dome is MaxDome
04:39:44 MaxIm DL/CCD is version 5.18
04:39:44 Imager is QSI Universal
04:39:44 Imager readout modes:
04:39:44   0 is Image Quality
04:39:44 Guider is SX Universal(internal/off-axis)
04:39:44 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:39:44 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:39:44 Using focus offsets from FilterInfo.txt
04:39:44 ACPS Observation S_Ori(1 of 1)
04:39:44   (belongs to Project Mogul_Mira, Plan S_Ori)
04:39:44   (turning on sidereal tracking)
04:39:44 Pointing updates are enabled
04:39:44   Start slew to S_Ori...
04:39:45 **Script Error (Tracking has been stopped)**
04:39:45 Source:  ASCOM.SiTechDll.Telescope
04:39:45 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
04:39:45 Script Context:
04:39:45     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
04:39:45     1739:         End If
04:39:45     1740:     Else
04:39:45 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
04:39:45                   ^
04:39:45     1742:     End If
04:39:45     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
04:39:45     1744:     
04:39:45 -- end --
ACP console log closed 02-Dec-2015 04:39:45 UTC