ACP console log opened 02-Dec-2015 07:29:28 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
07:29:28 This is AcquireScheduler V3.5.2
07:29:28 Custom image file path/names are in use
07:29:28 Custom auto-flip parameters are in use
07:29:28   PreFlip=300 PostFlip=120 AF=300 PU=60
07:29:28 Hardware GEM pier side reporting is available.
07:29:29 Initializing AcquireSupport V6.0.7
07:29:29 Weather safe, server is Boltwood Cloud Sensor II
07:29:29 Telescope is ACP->ACP->TMO61, driver V3
07:29:30 Dome is MaxDome
07:29:30 MaxIm DL/CCD is version 5.18
07:29:30 Imager is QSI Universal
07:29:30 Imager readout modes:
07:29:30   0 is Image Quality
07:29:30 Guider is SX Universal(internal/off-axis)
07:29:30 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
07:29:30 Calculated field of view (arcmin): H = 18.4 V = 13.8
07:29:30 Using focus offsets from FilterInfo.txt
07:29:30 ACPS Observation SY_CMa(1 of 1)
07:29:30   (belongs to Project Mogul_Mira, Plan SY_CMa)
07:29:30   (turning on sidereal tracking)
07:29:30 Pointing updates are enabled
07:29:30   Start slew to SY_CMa...
07:30:04 **Script Error (Tracking has been stopped)**
07:30:04 Source:  ASCOM.SiTechDll.Telescope
07:30:04 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
07:30:04 Script Context:
07:30:04     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
07:30:04     1739:         End If
07:30:04     1740:     Else
07:30:04 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
07:30:04                   ^
07:30:04     1742:     End If
07:30:04     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
07:30:04     1744:     
07:30:04 -- end --
ACP console log closed 02-Dec-2015 07:30:04 UTC