ACP console log opened 02-Dec-2015 08:11:10 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
08:11:10 This is AcquireScheduler V3.5.2
08:11:10 Custom image file path/names are in use
08:11:10 Custom auto-flip parameters are in use
08:11:10   PreFlip=300 PostFlip=120 AF=300 PU=60
08:11:10 Hardware GEM pier side reporting is available.
08:11:11 Initializing AcquireSupport V6.0.7
08:11:11 Weather safe, server is Boltwood Cloud Sensor II
08:11:11 Telescope is ACP->ACP->TMO61, driver V3
08:11:11 Dome is MaxDome
08:11:11 MaxIm DL/CCD is version 5.18
08:11:11 Imager is QSI Universal
08:11:11 Imager readout modes:
08:11:11   0 is Image Quality
08:11:11 Guider is SX Universal(internal/off-axis)
08:11:11 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
08:11:11 Calculated field of view (arcmin): H = 18.4 V = 13.8
08:11:11 Using focus offsets from FilterInfo.txt
08:11:11 ACPS Observation SA99_438(1 of 1)
08:11:11   (belongs to Project Landolt_1, Plan SA99_438)
08:11:11   (turning on sidereal tracking)
08:11:11 Pointing updates are enabled
08:11:11   Start slew to SA99_438...
08:11:12 **Script Error (Tracking has been stopped)**
08:11:12 Source:  ASCOM.SiTechDll.Telescope
08:11:12 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
08:11:12 Script Context:
08:11:12     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
08:11:12     1739:         End If
08:11:12     1740:     Else
08:11:12 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
08:11:12                   ^
08:11:12     1742:     End If
08:11:12     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
08:11:12     1744:     
08:11:12 -- end --
ACP console log closed 02-Dec-2015 08:11:12 UTC