ACP console log opened 02-Dec-2015 07:08:32 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
07:08:32 This is AcquireScheduler V3.5.2
07:08:32 Custom image file path/names are in use
07:08:32 Custom auto-flip parameters are in use
07:08:32   PreFlip=300 PostFlip=120 AF=300 PU=60
07:08:32 Hardware GEM pier side reporting is available.
07:08:33 Initializing AcquireSupport V6.0.7
07:08:33 Weather safe, server is Boltwood Cloud Sensor II
07:08:33 Telescope is ACP->ACP->TMO61, driver V3
07:08:33 Dome is MaxDome
07:08:34 MaxIm DL/CCD is version 5.18
07:08:34 Imager is QSI Universal
07:08:34 Imager readout modes:
07:08:34   0 is Image Quality
07:08:34 Guider is SX Universal(internal/off-axis)
07:08:34 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
07:08:34 Calculated field of view (arcmin): H = 18.4 V = 13.8
07:08:34 Using focus offsets from FilterInfo.txt
07:08:34 ACPS Observation SA98(1 of 1)
07:08:34   (belongs to Project Landolt_1, Plan SA98)
07:08:34   (turning on sidereal tracking)
07:08:34 Pointing updates are enabled
07:08:34   Start slew to SA98...
07:08:39 **Script Error (Tracking has been stopped)**
07:08:39 Source:  ASCOM.SiTechDll.Telescope
07:08:39 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
07:08:39 Script Context:
07:08:39     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
07:08:39     1739:         End If
07:08:39     1740:     Else
07:08:39 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
07:08:39                   ^
07:08:39     1742:     End If
07:08:39     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
07:08:39     1744:     
07:08:39 -- end --
ACP console log closed 02-Dec-2015 07:08:39 UTC