ACP console log opened 02-Dec-2015 10:49:32 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
10:49:32 This is AcquireScheduler V3.5.2
10:49:32 Custom image file path/names are in use
10:49:32 Custom auto-flip parameters are in use
10:49:32   PreFlip=300 PostFlip=120 AF=300 PU=60
10:49:32 Hardware GEM pier side reporting is available.
10:49:33 Initializing AcquireSupport V6.0.7
10:49:33 Weather safe, server is Boltwood Cloud Sensor II
10:49:33 Telescope is ACP->ACP->TMO61, driver V3
10:49:34 Dome is MaxDome
10:49:34 MaxIm DL/CCD is version 5.18
10:49:34 Imager is QSI Universal
10:49:34 Imager readout modes:
10:49:34   0 is Image Quality
10:49:34 Guider is SX Universal(internal/off-axis)
10:49:34 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
10:49:34 Calculated field of view (arcmin): H = 18.4 V = 13.8
10:49:34 Using focus offsets from FilterInfo.txt
10:49:34 ACPS Observation SA96_171(1 of 1)
10:49:34   (belongs to Project Landolt_2, Plan SA96_171)
10:49:34   (turning on sidereal tracking)
10:49:34 Pointing updates are enabled
10:49:34   Start slew to SA96_171...
10:49:34 **Script Error (Tracking has been stopped)**
10:49:34 Source:  ASCOM.SiTechDll.Telescope
10:49:34 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
10:49:34 Script Context:
10:49:34     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
10:49:34     1739:         End If
10:49:34     1740:     Else
10:49:34 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
10:49:34                   ^
10:49:34     1742:     End If
10:49:34     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
10:49:34     1744:     
10:49:34 -- end --
ACP console log closed 02-Dec-2015 10:49:34 UTC