ACP console log opened 02-Dec-2015 05:06:32 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
05:06:32 This is AcquireScheduler V3.5.2
05:06:32 Custom image file path/names are in use
05:06:32 Custom auto-flip parameters are in use
05:06:32   PreFlip=300 PostFlip=120 AF=300 PU=60
05:06:32 Hardware GEM pier side reporting is available.
05:06:33 Initializing AcquireSupport V6.0.7
05:06:33 Weather safe, server is Boltwood Cloud Sensor II
05:06:33 Telescope is ACP->ACP->TMO61, driver V3
05:06:33 Dome is MaxDome
05:06:34 MaxIm DL/CCD is version 5.18
05:06:34 Imager is QSI Universal
05:06:34 Imager readout modes:
05:06:34   0 is Image Quality
05:06:34 Guider is SX Universal(internal/off-axis)
05:06:34 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
05:06:34 Calculated field of view (arcmin): H = 18.4 V = 13.8
05:06:34 Using focus offsets from FilterInfo.txt
05:06:34 ACPS Observation SA96_171(1 of 1)
05:06:34   (belongs to Project Landolt_1, Plan SA96_171)
05:06:34   (turning on sidereal tracking)
05:06:34 Pointing updates are enabled
05:06:34   Start slew to SA96_171...
05:06:34 **Script Error (Tracking has been stopped)**
05:06:34 Source:  ASCOM.SiTechDll.Telescope
05:06:34 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
05:06:34 Script Context:
05:06:34     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
05:06:34     1739:         End If
05:06:34     1740:     Else
05:06:34 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
05:06:34                   ^
05:06:34     1742:     End If
05:06:34     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
05:06:34     1744:     
05:06:34 -- end --
ACP console log closed 02-Dec-2015 05:06:34 UTC