ACP console log opened 02-Dec-2015 06:59:22 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
06:59:22 This is AcquireScheduler V3.5.2
06:59:22 Custom image file path/names are in use
06:59:22 Custom auto-flip parameters are in use
06:59:22   PreFlip=300 PostFlip=120 AF=300 PU=60
06:59:22 Hardware GEM pier side reporting is available.
06:59:23 Initializing AcquireSupport V6.0.7
06:59:24 Weather safe, server is Boltwood Cloud Sensor II
06:59:24 Telescope is ACP->ACP->TMO61, driver V3
06:59:24 Dome is MaxDome
06:59:24 MaxIm DL/CCD is version 5.18
06:59:24 Imager is QSI Universal
06:59:24 Imager readout modes:
06:59:24   0 is Image Quality
06:59:24 Guider is SX Universal(internal/off-axis)
06:59:24 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
06:59:24 Calculated field of view (arcmin): H = 18.4 V = 13.8
06:59:24 Using focus offsets from FilterInfo.txt
06:59:24 ACPS Observation SA68_216(1 of 1)
06:59:24   (belongs to Project Landolt_2, Plan SA68_216)
06:59:24   (turning on sidereal tracking)
06:59:24 Pointing updates are enabled
06:59:24   Start slew to SA68_216...
06:59:24 **Script Error (Tracking has been stopped)**
06:59:25 Source:  ASCOM.SiTechDll.Telescope
06:59:25 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
06:59:25 Script Context:
06:59:25     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
06:59:25     1739:         End If
06:59:25     1740:     Else
06:59:25 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
06:59:25                   ^
06:59:25     1742:     End If
06:59:25     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
06:59:25     1744:     
06:59:25 -- end --
ACP console log closed 02-Dec-2015 06:59:25 UTC