ACP console log opened 02-Dec-2015 07:25:58 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
07:25:58 This is AcquireScheduler V3.5.2
07:25:58 Custom image file path/names are in use
07:25:58 Custom auto-flip parameters are in use
07:25:58   PreFlip=300 PostFlip=120 AF=300 PU=60
07:25:58 Hardware GEM pier side reporting is available.
07:25:59 Initializing AcquireSupport V6.0.7
07:25:59 Weather safe, server is Boltwood Cloud Sensor II
07:25:59 Telescope is ACP->ACP->TMO61, driver V3
07:25:59 Dome is MaxDome
07:25:59 MaxIm DL/CCD is version 5.18
07:25:59 Imager is QSI Universal
07:25:59 Imager readout modes:
07:25:59   0 is Image Quality
07:25:59 Guider is SX Universal(internal/off-axis)
07:25:59 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
07:25:59 Calculated field of view (arcmin): H = 18.4 V = 13.8
07:25:59 Using focus offsets from FilterInfo.txt
07:25:59 ACPS Observation SA52_56(1 of 1)
07:25:59   (belongs to Project Landolt_1, Plan SA52_56)
07:25:59   (turning on sidereal tracking)
07:25:59 Pointing updates are enabled
07:25:59   Start slew to SA52_56...
07:26:00 **Script Error (Tracking has been stopped)**
07:26:00 Source:  ASCOM.SiTechDll.Telescope
07:26:00 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
07:26:00 Script Context:
07:26:00     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
07:26:00     1739:         End If
07:26:00     1740:     Else
07:26:00 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
07:26:00                   ^
07:26:00     1742:     End If
07:26:00     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
07:26:00     1744:     
07:26:00 -- end --
ACP console log closed 02-Dec-2015 07:26:00 UTC