ACP console log opened 02-Dec-2015 12:11:40 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
12:11:40 This is AcquireScheduler V3.5.2
12:11:40 Custom image file path/names are in use
12:11:40 Custom auto-flip parameters are in use
12:11:40   PreFlip=300 PostFlip=120 AF=300 PU=60
12:11:40 Hardware GEM pier side reporting is available.
12:11:42 Initializing AcquireSupport V6.0.7
12:11:42 Weather safe, server is Boltwood Cloud Sensor II
12:11:42 Telescope is ACP->ACP->TMO61, driver V3
12:11:42 Dome is MaxDome
12:11:42 MaxIm DL/CCD is version 5.18
12:11:42 Imager is QSI Universal
12:11:42 Imager readout modes:
12:11:42   0 is Image Quality
12:11:42 Guider is SX Universal(internal/off-axis)
12:11:42 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
12:11:42 Calculated field of view (arcmin): H = 18.4 V = 13.8
12:11:42 Using focus offsets from FilterInfo.txt
12:11:42 ACPS Observation SA103(1 of 1)
12:11:42   (belongs to Project Landolt_1, Plan SA103)
12:11:42   (turning on sidereal tracking)
12:11:42 Pointing updates are enabled
12:11:42   Start slew to SA103...
12:11:43 **Script Error (Tracking has been stopped)**
12:11:43 Source:  ASCOM.SiTechDll.Telescope
12:11:43 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
12:11:43 Script Context:
12:11:43     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
12:11:43     1739:         End If
12:11:43     1740:     Else
12:11:43 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
12:11:43                   ^
12:11:43     1742:     End If
12:11:43     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
12:11:43     1744:     
12:11:43 -- end --
ACP console log closed 02-Dec-2015 12:11:43 UTC