ACP console log opened 02-Dec-2015 09:10:46 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
09:10:46 This is AcquireScheduler V3.5.2
09:10:46 Custom image file path/names are in use
09:10:46 Custom auto-flip parameters are in use
09:10:46   PreFlip=300 PostFlip=120 AF=300 PU=60
09:10:46 Hardware GEM pier side reporting is available.
09:10:47 Initializing AcquireSupport V6.0.7
09:10:47 Weather safe, server is Boltwood Cloud Sensor II
09:10:47 Telescope is ACP->ACP->TMO61, driver V3
09:10:47 Dome is MaxDome
09:10:47 MaxIm DL/CCD is version 5.18
09:10:47 Imager is QSI Universal
09:10:47 Imager readout modes:
09:10:47   0 is Image Quality
09:10:47 Guider is SX Universal(internal/off-axis)
09:10:47 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
09:10:47 Calculated field of view (arcmin): H = 18.4 V = 13.8
09:10:47 Using focus offsets from FilterInfo.txt
09:10:47 ACPS Observation SA100_267(1 of 1)
09:10:47   (belongs to Project Landolt_1, Plan SA100_267)
09:10:47   (turning on sidereal tracking)
09:10:47 Pointing updates are enabled
09:10:47   Start slew to SA100_267...
09:11:13 **Script Error (Tracking has been stopped)**
09:11:13 Source:  ASCOM.SiTechDll.Telescope
09:11:13 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
09:11:13 Script Context:
09:11:13     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
09:11:13     1739:         End If
09:11:13     1740:     Else
09:11:13 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
09:11:13                   ^
09:11:13     1742:     End If
09:11:13     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
09:11:13     1744:     
09:11:13 -- end --
ACP console log closed 02-Dec-2015 09:11:13 UTC