ACP console log opened 02-Dec-2015 09:53:14 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
09:53:14 This is AcquireScheduler V3.5.2
09:53:14 Custom image file path/names are in use
09:53:14 Custom auto-flip parameters are in use
09:53:14   PreFlip=300 PostFlip=120 AF=300 PU=60
09:53:14 Hardware GEM pier side reporting is available.
09:53:15 Initializing AcquireSupport V6.0.7
09:53:15 Weather safe, server is Boltwood Cloud Sensor II
09:53:15 Telescope is ACP->ACP->TMO61, driver V3
09:53:15 Dome is MaxDome
09:53:15 MaxIm DL/CCD is version 5.18
09:53:15 Imager is QSI Universal
09:53:15 Imager readout modes:
09:53:15   0 is Image Quality
09:53:15 Guider is SX Universal(internal/off-axis)
09:53:15 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
09:53:15 Calculated field of view (arcmin): H = 18.4 V = 13.8
09:53:15 Using focus offsets from FilterInfo.txt
09:53:15 ACPS Observation RZ_Leo(1 of 1)
09:53:15   (belongs to Project Walker, Plan RZ_Leo)
09:53:15   (turning on sidereal tracking)
09:53:15 Pointing updates are enabled
09:53:15   Start slew to RZ_Leo...
09:53:16 **Script Error (Tracking has been stopped)**
09:53:16 Source:  ASCOM.SiTechDll.Telescope
09:53:16 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
09:53:16 Script Context:
09:53:16     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
09:53:16     1739:         End If
09:53:16     1740:     Else
09:53:16 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
09:53:16                   ^
09:53:16     1742:     End If
09:53:16     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
09:53:16     1744:     
09:53:16 -- end --
ACP console log closed 02-Dec-2015 09:53:16 UTC