ACP console log opened 02-Dec-2015 05:03:12 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
05:03:12 This is AcquireScheduler V3.5.2
05:03:12 Custom image file path/names are in use
05:03:12 Custom auto-flip parameters are in use
05:03:12   PreFlip=300 PostFlip=120 AF=300 PU=60
05:03:12 Hardware GEM pier side reporting is available.
05:03:13 Initializing AcquireSupport V6.0.7
05:03:13 Weather safe, server is Boltwood Cloud Sensor II
05:03:13 Telescope is ACP->ACP->TMO61, driver V3
05:03:14 Dome is MaxDome
05:03:14 MaxIm DL/CCD is version 5.18
05:03:14 Imager is QSI Universal
05:03:14 Imager readout modes:
05:03:14   0 is Image Quality
05:03:14 Guider is SX Universal(internal/off-axis)
05:03:14 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
05:03:14 Calculated field of view (arcmin): H = 18.4 V = 13.8
05:03:14 Using focus offsets from FilterInfo.txt
05:03:14 ACPS Observation KH_15D(1 of 1)
05:03:14   (belongs to Project Staels, Plan KH_15D)
05:03:14   (turning on sidereal tracking)
05:03:14 Pointing updates are enabled
05:03:14   Start slew to KH_15D...
05:03:14 **Script Error (Tracking has been stopped)**
05:03:14 Source:  ASCOM.SiTechDll.Telescope
05:03:14 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
05:03:14 Script Context:
05:03:14     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
05:03:14     1739:         End If
05:03:14     1740:     Else
05:03:14 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
05:03:14                   ^
05:03:14     1742:     End If
05:03:14     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
05:03:14     1744:     
05:03:14 -- end --
ACP console log closed 02-Dec-2015 05:03:14 UTC