ACP console log opened 02-Dec-2015 04:36:26 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:36:26 This is AcquireScheduler V3.5.2
04:36:26 Custom image file path/names are in use
04:36:26 Custom auto-flip parameters are in use
04:36:26   PreFlip=300 PostFlip=120 AF=300 PU=60
04:36:26 Hardware GEM pier side reporting is available.
04:36:27 Initializing AcquireSupport V6.0.7
04:36:27 Weather safe, server is Boltwood Cloud Sensor II
04:36:27 Telescope is ACP->ACP->TMO61, driver V3
04:36:27 Dome is MaxDome
04:36:27 MaxIm DL/CCD is version 5.18
04:36:27 Imager is QSI Universal
04:36:27 Imager readout modes:
04:36:27   0 is Image Quality
04:36:27 Guider is SX Universal(internal/off-axis)
04:36:27 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:36:27 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:36:27 Using focus offsets from FilterInfo.txt
04:36:27 ACPS Observation GSC_3649-0825(1 of 1)
04:36:27   (belongs to Project Staels, Plan GSC_3649-0825)
04:36:27   (turning on sidereal tracking)
04:36:27 Pointing updates are enabled
04:36:27   Start slew to GSC_3649-0825...
04:37:03 **Script Error (Tracking has been stopped)**
04:37:03 Source:  ASCOM.SiTechDll.Telescope
04:37:03 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
04:37:03 Script Context:
04:37:03     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
04:37:03     1739:         End If
04:37:03     1740:     Else
04:37:03 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
04:37:03                   ^
04:37:03     1742:     End If
04:37:03     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
04:37:03     1744:     
04:37:03 -- end --
ACP console log closed 02-Dec-2015 04:37:03 UTC