ACP console log opened 02-Dec-2015 04:35:43 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:35:43 This is AcquireScheduler V3.5.2
04:35:43 Custom image file path/names are in use
04:35:43 Custom auto-flip parameters are in use
04:35:43   PreFlip=300 PostFlip=120 AF=300 PU=60
04:35:43 Hardware GEM pier side reporting is available.
04:35:44 Initializing AcquireSupport V6.0.7
04:35:44 Weather safe, server is Boltwood Cloud Sensor II
04:35:44 Telescope is ACP->ACP->TMO61, driver V3
04:35:45 Dome is MaxDome
04:35:45 MaxIm DL/CCD is version 5.18
04:35:45 Imager is QSI Universal
04:35:45 Imager readout modes:
04:35:45   0 is Image Quality
04:35:45 Guider is SX Universal(internal/off-axis)
04:35:45 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:35:45 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:35:45 Using focus offsets from FilterInfo.txt
04:35:45 ACPS Observation 2MASS_23275353+5214532(1 of 1)
04:35:45   (belongs to Project Staels, Plan 2MASS_23275353+5214532)
04:35:45   (turning on sidereal tracking)
04:35:45 Pointing updates are enabled
04:35:45   Start slew to 2MASS_23275353+5214532...
04:36:16 **Script Error (Tracking has been stopped)**
04:36:16 Source:  ASCOM.SiTechDll.Telescope
04:36:16 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
04:36:16 Script Context:
04:36:16     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
04:36:16     1739:         End If
04:36:16     1740:     Else
04:36:16 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
04:36:16                   ^
04:36:16     1742:     End If
04:36:16     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
04:36:16     1744:     
04:36:16 -- end --
ACP console log closed 02-Dec-2015 04:36:16 UTC