ACP console log opened 11-Nov-2015 04:30:26 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 04:30:26 This is AcquireScheduler V3.5.2 04:30:26 Custom image file path/names are in use 04:30:26 Custom auto-flip parameters are in use 04:30:26 PreFlip=300 PostFlip=120 AF=300 PU=60 04:30:26 Hardware GEM pier side reporting is available. 04:30:27 Initializing AcquireSupport V6.0.7 04:30:27 Weather safe, server is Boltwood Cloud Sensor II 04:30:27 Telescope is ACP->TMO, driver V3 04:30:28 Dome is MaxDome 04:30:28 MaxIm DL/CCD is version 5.18 04:30:28 Imager is QSI Universal 04:30:28 Imager readout modes: 04:30:28 0 is Image Quality 04:30:28 Guider is SX Universal(internal/off-axis) 04:30:28 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33 04:30:28 Calculated field of view (arcmin): H = 18.4 V = 13.8 04:30:28 Using focus offsets from FilterInfo.txt 04:30:28 ACPS Observation SA68_216(1 of 1) 04:30:28 (belongs to Project Landolt_1, Plan SA68_216) 04:30:28 (turning on sidereal tracking) 04:30:28 Pointing updates are enabled 04:30:28 Start slew to SA68_216... 04:30:29 (wait for slew to complete) 04:30:48 (slew complete) 04:30:48 [flip check: Tn=405s HAc=1497s GW=T HAz=1902s DWz=T WF=no] 04:30:48 Updating pointing... 04:30:48 Switching from I to V filter for pointing exposure 04:30:48 Focus change of 25 steps required 04:30:58 (taking 5 sec. exposure, V filter, binning = 4) 04:30:58 (using Image Quality readout mode) 04:30:58 (starting exposure) 04:31:11 (exposure complete and image downloaded) 04:31:11 Calibrating image... 04:31:11 **Calibration failed. Original image saved. 04:31:11 **MaxIm reports No suitable calibration groups were found. 04:31:11 Image finished 04:31:11 Plate-solve pointing image. 04:31:11 18 image stars found 04:31:12 61 catalog stars found 04:31:12 Solved! 18 stars matched. 04:31:12 Average residual is 0.4 arcsec. 04:31:12 Pointing error is 0.150 arcmin @ angle 86.43 04:31:12 True focal length is 346.1 cm. 04:31:12 True binned plate scales (arcsec/pix): H = 1.29 V = 1.29 04:31:12 True image center (J2000): 00h 18m 15.6s 15° 51' 00.56" 04:31:12 Imager sky position angle is 2.9 deg. 04:31:12 Image FWHM is 2.3 arcsec (1.77 pixels) 04:31:12 (avg FWHM = 1.78 arcsec) 04:31:12 [sync] pointing model updated 04:31:12 Internal guider, always re-slew 04:31:12 Re-slew to target. 04:31:12 Start slew to SA68_216... 04:31:13 (wait for slew to complete) 04:31:19 (slew complete) 04:31:19 Target is now centered. 04:31:19 [flip check: Tn=345s HAc=1529s GW=T HAz=1874s DWz=T WF=no] 04:31:19 Imaging to SA68_216_B_20151111_043119 04:31:19 Switching from V to B filter for imaging 04:31:19 Focus change of 9 steps required 04:31:30 (taking 45 sec. exposure, B filter, binning = 1) 04:31:30 (using Image Quality readout mode) 04:31:30 (starting exposure) 04:32:11 [**REFRESH TIMER EXCEPTION**] 04:32:11 [Source: MaxDome.Dome.1] 04:32:11 [Bad rotation sensor or stalled motor] 04:32:11 [Phase = 5] ACP console log closed 11-Nov-2015 04:32:12 UTC