ACP console log opened 02-Jul-2015 06:30:10 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
06:30:10 This is AcquireScheduler V3.5.2
06:30:10 Custom image file path/names are in use
06:30:10 Custom auto-flip parameters are in use
06:30:10   PreFlip=300 PostFlip=120 AF=300 PU=60
06:30:10 Hardware GEM pier side reporting is available.
06:30:10 This mount can be flipped on command.
06:30:11 Initializing AcquireSupport V6.0.7
06:30:13 Weather safe, server is Boltwood Cloud Sensor II
06:30:13 Telescope is ACP->TMO, driver V3
06:30:13 Dome is MaxDome
06:30:13 MaxIm DL/CCD is version 5.18
06:30:13 Imager is QSI Universal
06:30:13 Imager readout modes:
06:30:13   0 is Image Quality
06:30:13 Guider is SX Universal(internal/off-axis)
06:30:13 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
06:30:13 Calculated field of view (arcmin): H = 18.4 V = 13.8
06:30:13 Using focus offsets from FilterInfo.txt
06:30:13 ACPS Observation NGC_6366(1 of 1)
06:30:13   (belongs to Project Welch_gc, Plan NGC_6366)
06:30:13   (turning on sidereal tracking)
06:30:13 Pointing updates are enabled
06:30:13   Start slew to NGC_6366...
06:30:17   (wait for slew to complete)
06:30:21   (slew complete)
06:30:21     [flip check:  Tn=460s HAc=2095s GW=T HAz=2555s DWz=T WF=no]
06:30:21   Updating pointing...
06:30:21   Switching from SG to V filter for pointing exposure
06:30:21   Focus change of -12 steps required
06:30:29   (taking 5 sec. exposure, V filter, binning = 4)
06:30:29   (using Image Quality readout mode)
06:30:29   (starting exposure)
06:30:43   (exposure complete and image downloaded)
06:30:43   Calibrating image...
06:30:43 **Calibration failed. Original image saved.
06:30:43 **MaxIm reports No suitable calibration groups were found.
06:30:43   Image finished
06:30:43   Plate-solve pointing image.
06:30:43   69 image stars found
06:30:43   26 catalog stars found
06:30:43 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
06:30:43   Start slew to offset...
06:30:45   (wait for slew to complete)
06:30:49   (slew complete)
06:30:49   (taking 5 sec. exposure, V filter, binning = 4)
06:30:49   (using Image Quality readout mode)
06:30:49   (starting exposure)
06:31:03   (exposure complete and image downloaded)
06:31:03   Calibrating image...
06:31:03 **Calibration failed. Original image saved.
06:31:03 **MaxIm reports No suitable calibration groups were found.
06:31:03   Image finished
06:31:03   Plate-solve pointing image.
06:31:03   25 image stars found
06:31:03   31 catalog stars found
06:31:03   Solved! 10 stars matched.
06:31:03   Average residual is 0.31 arcsec.
06:31:03   Pointing error is 0.837 arcmin @ angle 297.76
06:31:03   True focal length is 346.2 cm.
06:31:03   True binned plate scales (arcsec/pix): H = 1.29 V = 1.29
06:31:03   True image center (J2000): 17h 27m 41.3s   -04° 27' 41.82"
06:31:03   Imager sky position angle is 359.5 deg.
06:31:03   [sync] pointing model updated
06:31:03   Re-slew to target.
06:31:03   Start slew to NGC_6366...
06:31:04   (wait for slew to complete)
06:31:08   (slew complete)
06:31:08   Target is now centered.
06:31:08     [flip check:  Tn=400s HAc=2144s GW=T HAz=2543s DWz=T WF=no]
06:31:09   Imaging to NGC_6366_SG_20150702_063108
06:31:09   Switching from V to SG filter for imaging
06:31:09   Focus change of 12 steps required
06:31:17   (taking 100 sec. exposure, SG filter, binning = 1)
06:31:17   (using Image Quality readout mode)
06:31:17   (starting exposure)
06:31:32 Exposure Aborted
ACP console log closed 02-Jul-2015 06:31:32 UTC