ACP console log opened 11-May-2015 10:03:57 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 10:03:57 This is AcquireScheduler V3.5.2 10:03:57 Custom image file path/names are in use 10:03:57 Custom auto-flip parameters are in use 10:03:57 PreFlip=300 PostFlip=120 AF=300 PU=60 10:03:57 Hardware GEM pier side reporting is available. 10:03:58 Initializing AcquireSupport V6.0.7 10:04:00 Weather safe, server is Boltwood Cloud Sensor II 10:04:00 Telescope is ACP->TMO, driver V3 10:04:01 Dome is MaxDome 10:04:06 MaxIm DL/CCD is version 5.18 10:04:06 Imager is QSI Universal 10:04:06 Imager readout modes: 10:04:06 0 is Use Adv Dialog 10:04:06 1 is Image Quality 10:04:06 2 is Fast Readout 10:04:06 Guider is SX Universal(internal/off-axis) 10:04:06 Calculated unbinned plate scales (arcsec/pix): H = 0.00 V = 0.00 10:04:06 Calculated field of view (arcmin): H = 0.0 V = 0.0 10:04:06 Using focus offsets from FilterInfo.txt 10:04:06 ACPS Observation V1404_Cyg(1 of 1) 10:04:06 (belongs to Project Walker, Plan V1404_Cyg) 10:04:06 (turning on sidereal tracking) 10:04:17 Pointing updates are enabled 10:04:18 Start slew to V1404_Cyg... 10:04:19 (wait for slew to complete) 10:04:48 (slew complete) 10:04:48 [flip check: Tn=540s HAc=-13459s GW=T HAz=-12918s DWz=T WF=no] 10:04:48 Updating pointing... 10:04:49 Switching from SG to V filter for pointing exposure 10:04:49 Focus change of -12 steps required 10:04:57 (taking 5 sec. exposure, V filter, binning = 1) 10:04:57 (using Fast Readout readout mode) 10:05:13 (starting exposure) 10:05:19 **Pointing update error from MaxIm.CCDCamera: **Failed to start the exposure 10:05:19 [flip check: Tn=480s HAc=-13428s GW=T HAz=-12948s DWz=T WF=no] 10:05:19 Imaging to V1404_Cyg_V_20150511_100519 10:05:19 (taking 180 sec. exposure, V filter, binning = 1) 10:05:19 (using Use Adv Dialog readout mode) 10:05:35 (starting exposure) 10:05:40 **Failed to start the exposure ACP console log closed 11-May-2015 10:05:41 UTC