ACP console log opened 10-May-2015 08:28:29 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 08:28:29 This is AcquireScheduler V3.5.2 08:28:29 Custom image file path/names are in use 08:28:29 Custom auto-flip parameters are in use 08:28:29 PreFlip=300 PostFlip=120 AF=300 PU=60 08:28:29 Hardware GEM pier side reporting is available. 08:28:31 Initializing AcquireSupport V6.0.7 08:28:33 Weather safe, server is Boltwood Cloud Sensor II 08:28:33 Telescope is ACP->TMO, driver V3 08:28:33 Dome is MaxDome 08:28:38 MaxIm DL/CCD is version 5.18 08:28:38 Imager is QSI Universal 08:28:38 Imager readout modes: 08:28:38 0 is Use Adv Dialog 08:28:38 1 is Image Quality 08:28:38 2 is Fast Readout 08:28:38 Guider is SX Universal(internal/off-axis) 08:28:38 Calculated unbinned plate scales (arcsec/pix): H = 0.00 V = 0.00 08:28:38 Calculated field of view (arcmin): H = 0.0 V = 0.0 08:28:39 Using focus offsets from FilterInfo.txt 08:28:39 ACPS Observation V1404_Cyg(1 of 1) 08:28:39 (belongs to Project Walker, Plan V1404_Cyg) 08:28:39 (turning on sidereal tracking) 08:28:50 Pointing updates are enabled 08:28:50 Start slew to V1404_Cyg... 08:28:51 (wait for slew to complete) 08:29:36 (slew complete) 08:29:36 [flip check: Tn=540s HAc=-19432s GW=T HAz=-18883s DWz=T WF=no] 08:29:36 Updating pointing... 08:29:37 Switching from B to V filter for pointing exposure 08:29:37 Focus change of -9 steps required 08:29:45 (taking 5 sec. exposure, V filter, binning = 1) 08:29:45 (using Fast Readout readout mode) 08:30:01 (starting exposure) 08:30:06 **Pointing update error from MaxIm.CCDCamera: **Failed to start the exposure 08:30:06 [flip check: Tn=480s HAc=-19392s GW=T HAz=-18912s DWz=T WF=no] 08:30:06 Imaging to V1404_Cyg_V_20150510_083006 08:30:07 (taking 180 sec. exposure, V filter, binning = 1) 08:30:07 (using Use Adv Dialog readout mode) 08:30:23 (starting exposure) 08:30:28 **Failed to start the exposure ACP console log closed 10-May-2015 08:30:29 UTC