ACP console log opened 10-May-2015 07:25:20 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 07:25:20 This is AcquireScheduler V3.5.2 07:25:20 Custom image file path/names are in use 07:25:20 Custom auto-flip parameters are in use 07:25:20 PreFlip=300 PostFlip=120 AF=300 PU=60 07:25:20 Hardware GEM pier side reporting is available. 07:25:21 Initializing AcquireSupport V6.0.7 07:25:23 Weather safe, server is Boltwood Cloud Sensor II 07:25:23 Telescope is ACP->TMO, driver V3 07:25:23 Dome is MaxDome 07:25:29 MaxIm DL/CCD is version 5.18 07:25:29 Imager is QSI Universal 07:25:29 Imager readout modes: 07:25:29 0 is Use Adv Dialog 07:25:29 1 is Image Quality 07:25:29 2 is Fast Readout 07:25:29 Guider is SX Universal(internal/off-axis) 07:25:29 Calculated unbinned plate scales (arcsec/pix): H = 0.00 V = 0.00 07:25:29 Calculated field of view (arcmin): H = 0.0 V = 0.0 07:25:29 Using focus offsets from FilterInfo.txt 07:25:29 ACPS Observation SA103(1 of 1) 07:25:29 (belongs to Project Landolt_2, Plan SA103) 07:25:29 (turning on sidereal tracking) 07:25:40 Pointing updates are enabled 07:25:40 Start slew to SA103... 07:25:41 (wait for slew to complete) 07:26:19 (slew complete) 07:26:19 [flip check: Tn=420s HAc=12806s GW=T HAz=13276s DWz=T WF=no] 07:26:19 Updating pointing... 07:26:19 (taking 5 sec. exposure, V filter, binning = 1) 07:26:19 (using Fast Readout readout mode) 07:26:35 (starting exposure) 07:26:41 **Pointing update error from MaxIm.CCDCamera: **Failed to start the exposure 07:26:41 [flip check: Tn=360s HAc=12827s GW=T HAz=13238s DWz=T WF=no] 07:26:41 Imaging to SA103_B_20150510_072641 07:26:41 Switching from V to B filter for imaging 07:26:41 Focus change of 9 steps required 07:26:51 (taking 60 sec. exposure, B filter, binning = 1) 07:26:51 (using Use Adv Dialog readout mode) 07:27:07 (starting exposure) 07:27:13 **Failed to start the exposure ACP console log closed 10-May-2015 07:27:13 UTC