ACP console log opened 07-May-2015 09:37:30 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 09:37:30 This is AcquireScheduler V3.5.2 09:37:30 Custom image file path/names are in use 09:37:30 Custom auto-flip parameters are in use 09:37:30 PreFlip=300 PostFlip=120 AF=300 PU=60 09:37:30 Hardware GEM pier side reporting is available. 09:37:31 Initializing AcquireSupport V6.0.7 09:37:33 Weather safe, server is Boltwood Cloud Sensor II 09:37:33 Telescope is ACP->TMO, driver V3 09:37:33 Dome is MaxDome 09:37:39 MaxIm DL/CCD is version 5.18 09:37:39 Imager is QSI Universal 09:37:39 Imager readout modes: 09:37:39 0 is Use Adv Dialog 09:37:39 1 is Image Quality 09:37:39 2 is Fast Readout 09:37:39 Guider is SX Universal(internal/off-axis) 09:37:39 Calculated unbinned plate scales (arcsec/pix): H = 0.00 V = 0.00 09:37:39 Calculated field of view (arcmin): H = 0.0 V = 0.0 09:37:39 Using focus offsets from FilterInfo.txt 09:37:39 ACPS Observation M56(1 of 1) 09:37:39 (belongs to Project AAVSO_Monitoring, Plan M56) 09:37:39 (turning on sidereal tracking) 09:37:50 Pointing updates are enabled 09:37:50 Start slew to M56... 09:37:51 (wait for slew to complete) 09:37:55 (slew complete) 09:37:55 [flip check: Tn=480s HAc=-6383s GW=T HAz=-5904s DWz=T WF=no] 09:37:55 Updating pointing... 09:37:55 Switching from SG to V filter for pointing exposure 09:37:55 Focus change of -12 steps required 09:38:04 (taking 5 sec. exposure, V filter, binning = 1) 09:38:04 (using Fast Readout readout mode) 09:38:20 (starting exposure) 09:38:25 **Pointing update error from MaxIm.CCDCamera: **Failed to start the exposure 09:38:25 [flip check: Tn=420s HAc=-6354s GW=T HAz=-5934s DWz=T WF=no] 09:38:25 Imaging to M56_V_20150507_093825 09:38:26 (taking 120 sec. exposure, V filter, binning = 1) 09:38:26 (using Use Adv Dialog readout mode) 09:38:42 (starting exposure) 09:38:47 **Failed to start the exposure ACP console log closed 07-May-2015 09:38:48 UTC