ACP console log opened 24-Mar-2015 06:13:47 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
06:13:47 This is AcquireScheduler V3.5.2
06:13:47 Custom image file path/names are in use
06:13:47 Custom auto-flip parameters are in use
06:13:47   PreFlip=300 PostFlip=120 AF=300 PU=60
06:13:47 Hardware GEM pier side reporting is available.
06:13:48 Initializing AcquireSupport V6.0.7
06:13:50 Weather safe, server is Boltwood Cloud Sensor II
06:13:50 Telescope is ACP->TMO, driver V3
06:13:50 Dome is MaxDome
06:13:50 MaxIm DL/CCD is version 5.18
06:13:50 Imager is QSI Universal
06:13:50 Imager readout modes:
06:13:50   0 is Use Adv Dialog
06:13:50   1 is Image Quality
06:13:50   2 is Fast Readout
06:13:50 Guider is SX Universal(internal/off-axis)
06:13:50 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
06:13:50 Calculated field of view (arcmin): H = 18.4 V = 13.8
06:13:50 Using focus offsets from FilterInfo.txt
06:13:50 ACPS Observation Pal_3(1 of 1)
06:13:50   (belongs to Project Welch_gc, Plan Pal_3)
06:13:50   (turning on sidereal tracking)
06:13:50 Pointing updates are enabled
06:13:50   Start slew to Pal_3...
06:13:51 **Script Error (Tracking has been stopped)**
06:13:51 Source:  ASCOM.SiTechDll.Telescope
06:13:51 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
06:13:51 Script Context:
06:13:51     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
06:13:51     1739:         End If
06:13:51     1740:     Else
06:13:51 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
06:13:51                   ^
06:13:51     1742:     End If
06:13:51     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
06:13:51     1744:     
06:13:51 -- end --
ACP console log closed 24-Mar-2015 06:13:51 UTC