ACP console log opened 29-Jan-2015 12:31:22 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 12:31:22 This is AcquireScheduler V3.5.2 12:31:22 Custom image file path/names are in use 12:31:22 Custom auto-flip parameters are in use 12:31:22 PreFlip=300 PostFlip=120 AF=300 PU=60 12:31:22 Hardware GEM pier side reporting is available. 12:31:23 Initializing AcquireSupport V6.0.7 12:31:24 Weather safe, server is Boltwood Cloud Sensor II 12:31:24 Telescope is ACP->TMO, driver V3 12:31:24 Dome is MaxDome 12:31:30 MaxIm DL/CCD is version 5.18 12:31:30 Imager is QSI Universal 12:31:30 Imager readout modes: 12:31:30 0 is Use Adv Dialog 12:31:30 1 is Image Quality 12:31:30 2 is Fast Readout 12:31:30 Guider is SX Universal(internal/off-axis) 12:31:30 Calculated unbinned plate scales (arcsec/pix): H = 0.00 V = 0.00 12:31:30 Calculated field of view (arcmin): H = 0.0 V = 0.0 12:31:30 Using focus offsets from FilterInfo.txt 12:31:30 ACPS Observation NGC_5634(1 of 1) 12:31:30 (belongs to Project Welch_gc, Plan NGC_5634) 12:31:30 (turning on sidereal tracking) 12:31:41 Pointing updates are enabled 12:31:41 Start slew to NGC_5634... 12:31:42 (wait for slew to complete) 12:32:16 (slew complete) 12:32:16 [flip check: Tn=560s HAc=-1870s GW=T HAz=-1310s DWz=T WF=no] 12:32:16 Updating pointing... 12:32:16 Switching from SI to V filter for pointing exposure 12:32:16 Focus change of 14 steps required 12:32:25 **Pointing update error from FocusMax: Object variable or With block variable not set 12:32:25 [flip check: Tn=500s HAc=-1861s GW=T HAz=-1361s DWz=T WF=no] 12:32:25 Imaging to NGC_5634_SG_20150129_123225 12:32:25 Switching from SI to SG filter for imaging 12:32:25 Focus change of 26 steps required 12:32:34 Object variable or With block variable not set ACP console log closed 29-Jan-2015 12:32:34 UTC