ACP console log opened 29-Jan-2015 12:28:04 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 12:28:04 This is AcquireScheduler V3.5.2 12:28:04 Custom image file path/names are in use 12:28:04 Custom auto-flip parameters are in use 12:28:04 PreFlip=300 PostFlip=120 AF=300 PU=60 12:28:04 Hardware GEM pier side reporting is available. 12:28:05 Initializing AcquireSupport V6.0.7 12:28:07 Weather safe, server is Boltwood Cloud Sensor II 12:28:07 Telescope is ACP->TMO, driver V3 12:28:08 Dome is MaxDome 12:28:13 MaxIm DL/CCD is version 5.18 12:28:13 Imager is QSI Universal 12:28:13 Imager readout modes: 12:28:13 0 is Use Adv Dialog 12:28:13 1 is Image Quality 12:28:13 2 is Fast Readout 12:28:13 Guider is SX Universal(internal/off-axis) 12:28:13 Calculated unbinned plate scales (arcsec/pix): H = 0.00 V = 0.00 12:28:13 Calculated field of view (arcmin): H = 0.0 V = 0.0 12:28:13 Using focus offsets from FilterInfo.txt 12:28:14 ACPS Observation NGC_5053(1 of 1) 12:28:14 (belongs to Project Welch_gc, Plan NGC_5053) 12:28:14 (turning on sidereal tracking) 12:28:24 Pointing updates are enabled 12:28:25 Start slew to NGC_5053... 12:28:26 (wait for slew to complete) 12:28:45 (slew complete) 12:28:45 [flip check: Tn=560s HAc=2312s GW=T HAz=2872s DWz=T WF=no] 12:28:45 Updating pointing... 12:28:45 Switching from SI to V filter for pointing exposure 12:28:45 Focus change of 14 steps required 12:28:53 **Pointing update error from FocusMax: Object variable or With block variable not set 12:28:53 [flip check: Tn=500s HAc=2320s GW=T HAz=2820s DWz=T WF=no] 12:28:53 Imaging to NGC_5053_SG_20150129_122853 12:28:53 Switching from SI to SG filter for imaging 12:28:53 Focus change of 26 steps required 12:29:01 Object variable or With block variable not set ACP console log closed 29-Jan-2015 12:29:02 UTC