ACP console log opened 29-Jan-2015 12:29:13 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 12:29:13 This is AcquireScheduler V3.5.2 12:29:13 Custom image file path/names are in use 12:29:13 Custom auto-flip parameters are in use 12:29:13 PreFlip=300 PostFlip=120 AF=300 PU=60 12:29:13 Hardware GEM pier side reporting is available. 12:29:14 Initializing AcquireSupport V6.0.7 12:29:16 Weather safe, server is Boltwood Cloud Sensor II 12:29:16 Telescope is ACP->TMO, driver V3 12:29:17 Dome is MaxDome 12:29:22 MaxIm DL/CCD is version 5.18 12:29:22 Imager is QSI Universal 12:29:22 Imager readout modes: 12:29:22 0 is Use Adv Dialog 12:29:22 1 is Image Quality 12:29:22 2 is Fast Readout 12:29:22 Guider is SX Universal(internal/off-axis) 12:29:22 Calculated unbinned plate scales (arcsec/pix): H = 0.00 V = 0.00 12:29:22 Calculated field of view (arcmin): H = 0.0 V = 0.0 12:29:22 Using focus offsets from FilterInfo.txt 12:29:25 ACPS Observation NGC_5024(1 of 1) 12:29:25 (belongs to Project Welch_gc, Plan NGC_5024) 12:29:25 (turning on sidereal tracking) 12:29:36 Pointing updates are enabled 12:29:36 Start slew to NGC_5024... 12:29:38 (wait for slew to complete) 12:29:43 (slew complete) 12:29:43 [flip check: Tn=560s HAc=2432s GW=T HAz=3142s DWz=T WF=no] 12:29:43 Updating pointing... 12:29:43 Switching from SI to V filter for pointing exposure 12:29:43 Focus change of 14 steps required 12:29:51 **Pointing update error from FocusMax: Object variable or With block variable not set 12:29:51 [flip check: Tn=500s HAc=2590s GW=T HAz=3090s DWz=T WF=no] 12:29:51 Imaging to NGC_5024_SG_20150129_122951 12:29:51 Switching from SI to SG filter for imaging 12:29:51 Focus change of 26 steps required 12:29:59 Object variable or With block variable not set ACP console log closed 29-Jan-2015 12:30:00 UTC