ACP console log opened 06-Nov-2013 12:19:46 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
12:19:46 This is AcquireScheduler V3.5.2
12:19:46 Custom image file path/names are in use
12:19:46 Custom auto-flip parameters are in use
12:19:46   PreFlip=300 PostFlip=120 AF=300 PU=60
12:19:46 Hardware GEM pier side reporting is available.
12:19:47 Initializing AcquireSupport V6.0.7
12:19:47 Weather safe, server is Weather Server Simulator
12:19:47 Telescope is ACP->TMO, driver V3
12:19:47 Dome is MaxDome
12:19:47 MaxIm DL/CCD is version 5.18
12:19:47 Imager is QSI Universal
12:19:47 Guider is SX Universal(internal/off-axis)
12:19:47 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
12:19:47 Calculated field of view (arcmin): H = 18.4 V = 13.8
12:19:47 Using focus offsets from FilterInfo.txt
12:19:47 ACPS Observation SA103(1 of 1)
12:19:47   (belongs to Project Landolt_2, Plan SA103)
12:19:47   (turning on sidereal tracking)
12:19:47 Pointing updates are enabled
12:19:47   Start slew to SA103...
12:20:20 **Script Error (Tracking has been stopped)**
12:20:20 Source:  ASCOM.SiTechDll.Telescope
12:20:20 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
12:20:20 Script Context:
12:20:20     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
12:20:20     1739:         End If
12:20:20     1740:     Else
12:20:20 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
12:20:20                   ^
12:20:20     1742:     End If
12:20:20     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
12:20:20     1744:     
12:20:20 -- end --
ACP console log closed 06-Nov-2013 12:20:20 UTC