ACP console log opened 23-Oct-2013 02:04:49 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
02:04:49 This is AcquireScheduler V3.5.2
02:04:49 Custom image file path/names are in use
02:04:49 Custom auto-flip parameters are in use
02:04:49   PreFlip=300 PostFlip=120 AF=300 PU=60
02:04:49 Hardware GEM pier side reporting is available.
02:04:50 Initializing AcquireSupport V6.0.7
02:04:50 Weather safe, server is Weather Server Simulator
02:04:50 Telescope is ACP->TMO, driver V3
02:04:51 Dome is MaxDome
02:04:51 MaxIm DL/CCD is version 5.18
02:04:51 Imager is QSI Universal
02:04:51 Guider is SX Universal(internal/off-axis)
02:04:51 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
02:04:51 Calculated field of view (arcmin): H = 18.4 V = 13.8
02:04:51 Using focus offsets from FilterInfo.txt
02:04:51 ACPS Observation V1404_Cyg(1 of 1)
02:04:51   (belongs to Project Walker, Plan V1404_Cyg)
02:04:51   (turning on sidereal tracking)
02:04:51 Pointing updates are enabled
02:04:51   Start slew to V1404_Cyg...
02:05:26 **Script Error (Tracking has been stopped)**
02:05:26 Source:  ASCOM.SiTechDll.Telescope
02:05:26 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
02:05:26 Script Context:
02:05:26     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
02:05:26     1739:         End If
02:05:26     1740:     Else
02:05:26 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
02:05:26                   ^
02:05:26     1742:     End If
02:05:26     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
02:05:26     1744:     
02:05:26 -- end --
ACP console log closed 23-Oct-2013 02:05:26 UTC