ACP console log opened 23-Oct-2013 02:01:25 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
02:01:25 This is AcquireScheduler V3.5.2
02:01:25 Custom image file path/names are in use
02:01:25 Custom auto-flip parameters are in use
02:01:25   PreFlip=300 PostFlip=120 AF=300 PU=60
02:01:25 Hardware GEM pier side reporting is available.
02:01:26 Initializing AcquireSupport V6.0.7
02:01:26 Weather safe, server is Weather Server Simulator
02:01:26 Telescope is ACP->TMO, driver V3
02:01:26 Dome is MaxDome
02:01:26 MaxIm DL/CCD is version 5.18
02:01:26 Imager is QSI Universal
02:01:26 Guider is SX Universal(internal/off-axis)
02:01:26 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
02:01:26 Calculated field of view (arcmin): H = 18.4 V = 13.8
02:01:26 Using focus offsets from FilterInfo.txt
02:01:26 ACPS Observation SA116_180(1 of 1)
02:01:26   (belongs to Project Landolt_2, Plan SA116_180)
02:01:26   (turning on sidereal tracking)
02:01:26 Pointing updates are enabled
02:01:26   Start slew to SA116_180...
02:01:27 **Script Error (Tracking has been stopped)**
02:01:27 Source:  ASCOM.SiTechDll.Telescope
02:01:27 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
02:01:27 Script Context:
02:01:27     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
02:01:27     1739:         End If
02:01:27     1740:     Else
02:01:27 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
02:01:27                   ^
02:01:27     1742:     End If
02:01:27     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
02:01:27     1744:     
02:01:27 -- end --
ACP console log closed 23-Oct-2013 02:01:27 UTC