ACP console log opened 23-Oct-2013 02:00:10 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
02:00:10 This is AcquireScheduler V3.5.2
02:00:10 Custom image file path/names are in use
02:00:10 Custom auto-flip parameters are in use
02:00:10   PreFlip=300 PostFlip=120 AF=300 PU=60
02:00:10 Hardware GEM pier side reporting is available.
02:00:11 Initializing AcquireSupport V6.0.7
02:00:11 Weather safe, server is Weather Server Simulator
02:00:11 Telescope is ACP->TMO, driver V3
02:00:11 Dome is MaxDome
02:00:11 MaxIm DL/CCD is version 5.18
02:00:11 Imager is QSI Universal
02:00:11 Guider is SX Universal(internal/off-axis)
02:00:11 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
02:00:11 Calculated field of view (arcmin): H = 18.4 V = 13.8
02:00:11 Using focus offsets from FilterInfo.txt
02:00:11 ACPS Observation SA1119(1 of 1)
02:00:11   (belongs to Project Landolt_1, Plan SA1119)
02:00:11   (turning on sidereal tracking)
02:00:11 Pointing updates are enabled
02:00:11   Start slew to SA1119...
02:00:12 **Script Error (Tracking has been stopped)**
02:00:12 Source:  ASCOM.SiTechDll.Telescope
02:00:12 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
02:00:12 Script Context:
02:00:12     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
02:00:12     1739:         End If
02:00:12     1740:     Else
02:00:12 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
02:00:12                   ^
02:00:12     1742:     End If
02:00:12     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
02:00:12     1744:     
02:00:12 -- end --
ACP console log closed 23-Oct-2013 02:00:12 UTC