ACP console log opened 23-Oct-2013 01:59:51 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 01:59:51 This is AcquireScheduler V3.5.2 01:59:51 Custom image file path/names are in use 01:59:51 Custom auto-flip parameters are in use 01:59:51 PreFlip=300 PostFlip=120 AF=300 PU=60 01:59:51 Hardware GEM pier side reporting is available. 01:59:52 Initializing AcquireSupport V6.0.7 01:59:52 Weather safe, server is Weather Server Simulator 01:59:52 Telescope is ACP->TMO, driver V3 01:59:53 Dome is MaxDome 01:59:53 MaxIm DL/CCD is version 5.18 01:59:53 Imager is QSI Universal 01:59:53 Guider is SX Universal(internal/off-axis) 01:59:53 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33 01:59:53 Calculated field of view (arcmin): H = 18.4 V = 13.8 01:59:53 Using focus offsets from FilterInfo.txt 01:59:53 ACPS Observation SA111(1 of 1) 01:59:53 (belongs to Project Landolt_1, Plan SA111) 01:59:53 (turning on sidereal tracking) 01:59:53 Pointing updates are enabled 01:59:53 Start slew to SA111... 01:59:55 **Script Error (Tracking has been stopped)** 01:59:55 Source: ASCOM.SiTechDll.Telescope 01:59:55 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. 01:59:55 Script Context: 01:59:55 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 01:59:55 1739: End If 01:59:55 1740: Else 01:59:55 => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW 01:59:55 ^ 01:59:55 1742: End If 01:59:55 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 01:59:55 1744: 01:59:55 -- end -- ACP console log closed 23-Oct-2013 01:59:55 UTC