ACP console log opened 23-Oct-2013 02:05:55 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
02:05:55 This is AcquireScheduler V3.5.2
02:05:55 Custom image file path/names are in use
02:05:55 Custom auto-flip parameters are in use
02:05:55   PreFlip=300 PostFlip=120 AF=300 PU=60
02:05:55 Hardware GEM pier side reporting is available.
02:05:56 Initializing AcquireSupport V6.0.7
02:05:56 Weather safe, server is Weather Server Simulator
02:05:56 Telescope is ACP->TMO, driver V3
02:05:56 Dome is MaxDome
02:05:56 MaxIm DL/CCD is version 5.18
02:05:56 Imager is QSI Universal
02:05:56 Guider is SX Universal(internal/off-axis)
02:05:56 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
02:05:56 Calculated field of view (arcmin): H = 18.4 V = 13.8
02:05:56 Using focus offsets from FilterInfo.txt
02:05:56 ACPS Observation 2MASS_23275353+5214532(1 of 1)
02:05:56   (belongs to Project Staels, Plan 2MASS_23275353+5214532)
02:05:56   (turning on sidereal tracking)
02:05:56 Pointing updates are enabled
02:05:56   Start slew to 2MASS_23275353+5214532...
02:06:30 **Script Error (Tracking has been stopped)**
02:06:30 Source:  ASCOM.SiTechDll.Telescope
02:06:30 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
02:06:30 Script Context:
02:06:30     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
02:06:30     1739:         End If
02:06:30     1740:     Else
02:06:30 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
02:06:30                   ^
02:06:30     1742:     End If
02:06:30     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
02:06:30     1744:     
02:06:30 -- end --
ACP console log closed 23-Oct-2013 02:06:30 UTC