ACP console log opened 26-Feb-2018 09:40:36 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
09:40:36 This is AcquireScheduler V3.5.2
09:40:36 Custom image file path/names are in use
09:40:36 Custom auto-flip parameters are in use
09:40:36   PreFlip=300 PostFlip=120 AF=300 PU=60
09:40:36 Hardware GEM pier side reporting is available.
09:40:37 Initializing AcquireSupport V6.0.7
09:40:37 Weather safe, server is Boltwood Cloud Sensor II
09:40:37 Telescope is ACP->ACP->TMO61, driver V3
09:40:37 Dome is MaxDome
09:40:37 MaxIm DL/CCD is version 5.18
09:40:37 Imager is QSI Universal
09:40:37 Imager readout modes:
09:40:37   0 is Image Quality
09:40:37 Guider is SX Universal(internal/off-axis)
09:40:38 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
09:40:38 Calculated field of view (arcmin): H = 18.4 V = 13.8
09:40:38 Using focus offsets from FilterInfo.txt
09:40:38 ACPS Observation V1015_Her(1 of 1)
09:40:38   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan V1015_Her)
09:40:38   (turning on sidereal tracking)
09:40:38 Pointing updates are enabled
09:40:38   Start slew to V1015_Her...
09:40:38 **Script Error (Tracking has been stopped)**
09:40:38 Source:  ASCOM.SiTechDll.Telescope
09:40:38 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
09:40:38 Script Context:
09:40:38     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
09:40:38     1739:         End If
09:40:38     1740:     Else
09:40:38 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
09:40:38                   ^
09:40:38     1742:     End If
09:40:38     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
09:40:38     1744:     
09:40:38 -- end --
ACP console log closed 26-Feb-2018 09:40:38 UTC