ACP console log opened 26-Feb-2018 11:21:27 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
11:21:27 This is AcquireScheduler V3.5.2
11:21:27 Custom image file path/names are in use
11:21:27 Custom auto-flip parameters are in use
11:21:27   PreFlip=300 PostFlip=120 AF=300 PU=60
11:21:27 Hardware GEM pier side reporting is available.
11:21:29 Initializing AcquireSupport V6.0.7
11:21:29 Weather safe, server is Boltwood Cloud Sensor II
11:21:29 Telescope is ACP->ACP->TMO61, driver V3
11:21:29 Dome is MaxDome
11:21:29 MaxIm DL/CCD is version 5.18
11:21:29 Imager is QSI Universal
11:21:29 Imager readout modes:
11:21:29   0 is Image Quality
11:21:29 Guider is SX Universal(internal/off-axis)
11:21:29 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
11:21:29 Calculated field of view (arcmin): H = 18.4 V = 13.8
11:21:29 Using focus offsets from FilterInfo.txt
11:21:29 ACPS Observation NSVS_11201899(1 of 1)
11:21:29   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan NSVS_11201899)
11:21:29   (turning on sidereal tracking)
11:21:29 Pointing updates are enabled
11:21:29   Start slew to NSVS_11201899...
11:22:13 **Script Error (Tracking has been stopped)**
11:22:13 Source:  ASCOM.SiTechDll.Telescope
11:22:13 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
11:22:13 Script Context:
11:22:13     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
11:22:13     1739:         End If
11:22:13     1740:     Else
11:22:13 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
11:22:13                   ^
11:22:13     1742:     End If
11:22:13     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
11:22:13     1744:     
11:22:13 -- end --
ACP console log closed 26-Feb-2018 11:22:13 UTC