ACP console log opened 26-Feb-2018 08:32:13 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
08:32:13 This is AcquireScheduler V3.5.2
08:32:13 Custom image file path/names are in use
08:32:13 Custom auto-flip parameters are in use
08:32:13   PreFlip=300 PostFlip=120 AF=300 PU=60
08:32:13 Hardware GEM pier side reporting is available.
08:32:15 Initializing AcquireSupport V6.0.7
08:32:15 Weather safe, server is Boltwood Cloud Sensor II
08:32:15 Telescope is ACP->ACP->TMO61, driver V3
08:32:15 Dome is MaxDome
08:32:15 MaxIm DL/CCD is version 5.18
08:32:15 Imager is QSI Universal
08:32:15 Imager readout modes:
08:32:15   0 is Image Quality
08:32:15 Guider is SX Universal(internal/off-axis)
08:32:15 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
08:32:15 Calculated field of view (arcmin): H = 18.4 V = 13.8
08:32:15 Using focus offsets from FilterInfo.txt
08:32:15 ACPS Observation Mkn_501(1 of 1)
08:32:15   (belongs to Project AAVSO_SXAC_Mkn_501, Plan Mkn_501)
08:32:15   (turning on sidereal tracking)
08:32:15 Pointing updates are enabled
08:32:15   Start slew to Mkn_501...
08:32:16 **Script Error (Tracking has been stopped)**
08:32:16 Source:  ASCOM.SiTechDll.Telescope
08:32:16 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
08:32:16 Script Context:
08:32:16     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
08:32:16     1739:         End If
08:32:16     1740:     Else
08:32:16 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
08:32:16                   ^
08:32:16     1742:     End If
08:32:16     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
08:32:16     1744:     
08:32:16 -- end --
ACP console log closed 26-Feb-2018 08:32:16 UTC