ACP console log opened 26-Feb-2018 12:29:13 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
12:29:13 This is AcquireScheduler V3.5.2
12:29:13 Custom image file path/names are in use
12:29:13 Custom auto-flip parameters are in use
12:29:13   PreFlip=300 PostFlip=120 AF=300 PU=60
12:29:13 Hardware GEM pier side reporting is available.
12:29:14 Initializing AcquireSupport V6.0.7
12:29:14 Weather safe, server is Boltwood Cloud Sensor II
12:29:14 Telescope is ACP->ACP->TMO61, driver V3
12:29:14 Dome is MaxDome
12:29:14 MaxIm DL/CCD is version 5.18
12:29:14 Imager is QSI Universal
12:29:14 Imager readout modes:
12:29:14   0 is Image Quality
12:29:14 Guider is SX Universal(internal/off-axis)
12:29:14 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
12:29:14 Calculated field of view (arcmin): H = 18.4 V = 13.8
12:29:14 Using focus offsets from FilterInfo.txt
12:29:14 ACPS Observation 2MASS_J19395313+0557550(1 of 1)
12:29:14   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan 2MASS_J19395313+0557550)
12:29:14   (turning on sidereal tracking)
12:29:15 Pointing updates are enabled
12:29:15   Start slew to 2MASS_J19395313+0557550...
12:29:15 **Script Error (Tracking has been stopped)**
12:29:15 Source:  ASCOM.SiTechDll.Telescope
12:29:15 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
12:29:15 Script Context:
12:29:15     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
12:29:15     1739:         End If
12:29:15     1740:     Else
12:29:15 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
12:29:15                   ^
12:29:15     1742:     End If
12:29:15     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
12:29:15     1744:     
12:29:15 -- end --
ACP console log closed 26-Feb-2018 12:29:15 UTC