ACP console log opened 28-Jun-2017 07:01:27 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
07:01:27 This is AcquireScheduler V3.5.2
07:01:27 Custom image file path/names are in use
07:01:27 Custom auto-flip parameters are in use
07:01:27   PreFlip=300 PostFlip=120 AF=300 PU=60
07:01:27 Hardware GEM pier side reporting is available.
07:01:29 Initializing AcquireSupport V6.0.7
07:01:29 Weather safe, server is Boltwood Cloud Sensor II
07:01:29 Telescope is ACP->ACP->TMO61, driver V3
07:01:29 Dome is MaxDome
07:01:29 MaxIm DL/CCD is version 5.18
07:01:29 Imager is QSI Universal
07:01:29 Imager readout modes:
07:01:29   0 is Image Quality
07:01:29 Guider is SX Universal(internal/off-axis)
07:01:29 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
07:01:29 Calculated field of view (arcmin): H = 18.4 V = 13.8
07:01:29 Using focus offsets from FilterInfo.txt
07:01:29 ACPS Observation Mkn_501(1 of 1)
07:01:29   (belongs to Project AAVSO_SXAC_Mkn_501, Plan Mkn_501)
07:01:29   (turning on sidereal tracking)
07:01:29 Pointing updates are enabled
07:01:29   Start slew to Mkn_501...
07:01:30   (wait for slew to complete)
07:01:58   (slew complete)
07:01:58     [flip check:  Tn=460s HAc=5220s GW=T HAz=5680s DWz=T WF=no]
07:01:58   Updating pointing...
07:01:58   (taking 5 sec. exposure, V filter, binning = 4)
07:01:58   (using Image Quality readout mode)
07:01:59   (starting exposure)
07:02:11   (exposure complete and image downloaded)
07:02:11   Calibrating image...
07:02:11 **Calibration failed. Original image saved.
07:02:11 **MaxIm reports No suitable calibration groups were found.
07:02:11   Image finished
07:02:11   Plate-solve pointing image.
07:02:12   5 image stars found
07:02:12   79 catalog stars found
07:02:12 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
07:02:12   Start slew to offset...
07:02:13   (wait for slew to complete)
07:02:16   (slew complete)
07:02:16   (taking 5 sec. exposure, V filter, binning = 4)
07:02:16   (using Image Quality readout mode)
07:02:16   (starting exposure)
07:02:28   (exposure complete and image downloaded)
07:02:28   Calibrating image...
07:02:28 **Calibration failed. Original image saved.
07:02:28 **MaxIm reports No suitable calibration groups were found.
07:02:28   Image finished
07:02:28   Plate-solve pointing image.
07:02:28   3 image stars found
07:02:29   77 catalog stars found
07:02:29 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
07:02:29   Start slew to Mkn_501...
07:02:30   (wait for slew to complete)
07:02:32 CloudSensorII: Weather is unsafe!
07:02:32                SkyCondition is Very Cloudy
07:02:32 **WEATHER ALERT: The weather has become unsafe!
07:02:33 **Script Error**
07:02:33 Source:  ACP
07:02:33 Message: The script was aborted. at line 951 column 17.
07:02:33 Script Context:
07:02:33      948:             If Not bPtgUpdDone Then                                 ' If didn't get ptg upd from auto-flip
07:02:33      949:                 On Error Resume Next                                ' May fail on slew-back below horizon
07:02:33      950:                 isPointing = True                                   ' For ACP web UI (typ.)
07:02:33 =>   951:                 bPtgUpdDone = SUP.UpdatePointing(OBS.Name, OBS.RA, OBS.Dec, OBS.PA)  ' Uses Clear or filter specified for pointing updates
07:02:33                           ^
07:02:33      952:                 If Err.Number <> 0 Then 
07:02:33      953:                     bPtgUpdDone = False                             ' Hard error, probably horizon
07:02:33      954:                     Console.PrintLine "**Pointing update error from " & Err.Source & _
07:02:33 -- end --
ACP console log closed 28-Jun-2017 07:02:33 UTC