ACP console log opened 05-May-2017 08:40:59 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
08:40:59 This is AcquireScheduler V3.5.2
08:40:59 Custom image file path/names are in use
08:40:59 Custom auto-flip parameters are in use
08:40:59   PreFlip=300 PostFlip=120 AF=300 PU=60
08:40:59 Hardware GEM pier side reporting is available.
08:41:00 Initializing AcquireSupport V6.0.7
08:41:00 Weather safe, server is Boltwood Cloud Sensor II
08:41:00 Telescope is ACP->ACP->TMO61, driver V3
08:41:01 Dome is MaxDome
08:41:01 MaxIm DL/CCD is version 5.18
08:41:01 Imager is QSI Universal
08:41:01 Imager readout modes:
08:41:01   0 is Image Quality
08:41:01 Guider is SX Universal(internal/off-axis)
08:41:01 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
08:41:01 Calculated field of view (arcmin): H = 18.4 V = 13.8
08:41:01 Using focus offsets from FilterInfo.txt
08:41:01 ACPS Observation V1907_Cyg(1 of 1)
08:41:01   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan V1907_Cyg)
08:41:01   (turning on sidereal tracking)
08:41:01 Pointing updates are enabled
08:41:01   Start slew to V1907_Cyg...
08:41:01 **Script Error (Tracking has been stopped)**
08:41:01 Source:  ASCOM.SiTechDll.Telescope
08:41:01 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
08:41:01 Script Context:
08:41:01     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
08:41:01     1739:         End If
08:41:01     1740:     Else
08:41:01 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
08:41:01                   ^
08:41:01     1742:     End If
08:41:01     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
08:41:01     1744:     
08:41:01 -- end --
ACP console log closed 05-May-2017 08:41:01 UTC