ACP console log opened 05-May-2017 08:44:19 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
08:44:19 This is AcquireScheduler V3.5.2
08:44:19 Custom image file path/names are in use
08:44:19 Custom auto-flip parameters are in use
08:44:19   PreFlip=300 PostFlip=120 AF=300 PU=60
08:44:19 Hardware GEM pier side reporting is available.
08:44:21 Initializing AcquireSupport V6.0.7
08:44:21 Weather safe, server is Boltwood Cloud Sensor II
08:44:21 Telescope is ACP->ACP->TMO61, driver V3
08:44:21 Dome is MaxDome
08:44:21 MaxIm DL/CCD is version 5.18
08:44:21 Imager is QSI Universal
08:44:21 Imager readout modes:
08:44:21   0 is Image Quality
08:44:21 Guider is SX Universal(internal/off-axis)
08:44:21 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
08:44:21 Calculated field of view (arcmin): H = 18.4 V = 13.8
08:44:21 Using focus offsets from FilterInfo.txt
08:44:21 ACPS Observation V1904_Cyg(1 of 1)
08:44:21   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan V1904_Cyg)
08:44:21   (turning on sidereal tracking)
08:44:21 Pointing updates are enabled
08:44:21   Start slew to V1904_Cyg...
08:44:22 **Script Error (Tracking has been stopped)**
08:44:22 Source:  ASCOM.SiTechDll.Telescope
08:44:22 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
08:44:22 Script Context:
08:44:22     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
08:44:22     1739:         End If
08:44:22     1740:     Else
08:44:22 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
08:44:22                   ^
08:44:22     1742:     End If
08:44:22     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
08:44:22     1744:     
08:44:22 -- end --
ACP console log closed 05-May-2017 08:44:22 UTC