ACP console log opened 05-May-2017 05:12:42 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
05:12:42 This is AcquireScheduler V3.5.2
05:12:42 Custom image file path/names are in use
05:12:42 Custom auto-flip parameters are in use
05:12:42   PreFlip=300 PostFlip=120 AF=300 PU=60
05:12:42 Hardware GEM pier side reporting is available.
05:12:43 Initializing AcquireSupport V6.0.7
05:12:43 Weather safe, server is Boltwood Cloud Sensor II
05:12:43 Telescope is ACP->ACP->TMO61, driver V3
05:12:43 Dome is MaxDome
05:12:43 MaxIm DL/CCD is version 5.18
05:12:43 Imager is QSI Universal
05:12:43 Imager readout modes:
05:12:43   0 is Image Quality
05:12:43 Guider is SX Universal(internal/off-axis)
05:12:43 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
05:12:43 Calculated field of view (arcmin): H = 18.4 V = 13.8
05:12:43 Using focus offsets from FilterInfo.txt
05:12:43 ACPS Observation V1015_Her(1 of 1)
05:12:43   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan V1015_Her)
05:12:43   (turning on sidereal tracking)
05:12:43 Pointing updates are enabled
05:12:43   Start slew to V1015_Her...
05:12:44 **Script Error (Tracking has been stopped)**
05:12:44 Source:  ASCOM.SiTechDll.Telescope
05:12:44 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
05:12:44 Script Context:
05:12:44     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
05:12:44     1739:         End If
05:12:44     1740:     Else
05:12:44 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
05:12:44                   ^
05:12:44     1742:     End If
05:12:44     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
05:12:44     1744:     
05:12:44 -- end --
ACP console log closed 05-May-2017 05:12:44 UTC