ACP console log opened 05-May-2017 03:47:46 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
03:47:46 This is AcquireScheduler V3.5.2
03:47:46 Custom image file path/names are in use
03:47:46 Custom auto-flip parameters are in use
03:47:46   PreFlip=300 PostFlip=120 AF=300 PU=60
03:47:46 Hardware GEM pier side reporting is available.
03:47:47 Initializing AcquireSupport V6.0.7
03:47:47 Weather safe, server is Boltwood Cloud Sensor II
03:47:47 Telescope is ACP->ACP->TMO61, driver V3
03:47:47 Dome is MaxDome
03:47:48 MaxIm DL/CCD is version 5.18
03:47:48 Imager is QSI Universal
03:47:48 Imager readout modes:
03:47:48   0 is Image Quality
03:47:48 Guider is SX Universal(internal/off-axis)
03:47:48 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
03:47:48 Calculated field of view (arcmin): H = 18.4 V = 13.8
03:47:48 Using focus offsets from FilterInfo.txt
03:47:48 ACPS Observation V0336_Ser(1 of 1)
03:47:48   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan V0336_Ser)
03:47:48   (turning on sidereal tracking)
03:47:48 Pointing updates are enabled
03:47:48   Start slew to V0336_Ser...
03:47:48 **Script Error (Tracking has been stopped)**
03:47:48 Source:  ASCOM.SiTechDll.Telescope
03:47:48 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
03:47:48 Script Context:
03:47:48     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
03:47:48     1739:         End If
03:47:48     1740:     Else
03:47:48 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
03:47:48                   ^
03:47:48     1742:     End If
03:47:48     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
03:47:48     1744:     
03:47:48 -- end --
ACP console log closed 05-May-2017 03:47:48 UTC