ACP console log opened 05-May-2017 06:53:02 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
06:53:02 This is AcquireScheduler V3.5.2
06:53:02 Custom image file path/names are in use
06:53:02 Custom auto-flip parameters are in use
06:53:02   PreFlip=300 PostFlip=120 AF=300 PU=60
06:53:02 Hardware GEM pier side reporting is available.
06:53:03 Initializing AcquireSupport V6.0.7
06:53:03 Weather safe, server is Boltwood Cloud Sensor II
06:53:03 Telescope is ACP->ACP->TMO61, driver V3
06:53:03 Dome is MaxDome
06:53:03 MaxIm DL/CCD is version 5.18
06:53:03 Imager is QSI Universal
06:53:03 Imager readout modes:
06:53:03   0 is Image Quality
06:53:03 Guider is SX Universal(internal/off-axis)
06:53:03 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
06:53:03 Calculated field of view (arcmin): H = 18.4 V = 13.8
06:53:03 Using focus offsets from FilterInfo.txt
06:53:03 ACPS Observation NSVS_11201899(1 of 1)
06:53:03   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan NSVS_11201899)
06:53:03   (turning on sidereal tracking)
06:53:03 Pointing updates are enabled
06:53:03   Start slew to NSVS_11201899...
06:53:38 **Script Error (Tracking has been stopped)**
06:53:38 Source:  ASCOM.SiTechDll.Telescope
06:53:38 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
06:53:38 Script Context:
06:53:38     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
06:53:38     1739:         End If
06:53:38     1740:     Else
06:53:38 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
06:53:38                   ^
06:53:38     1742:     End If
06:53:38     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
06:53:38     1744:     
06:53:38 -- end --
ACP console log closed 05-May-2017 06:53:38 UTC