ACP console log opened 05-May-2017 07:00:20 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
07:00:20 This is AcquireScheduler V3.5.2
07:00:20 Custom image file path/names are in use
07:00:20 Custom auto-flip parameters are in use
07:00:20   PreFlip=300 PostFlip=120 AF=300 PU=60
07:00:20 Hardware GEM pier side reporting is available.
07:00:21 Initializing AcquireSupport V6.0.7
07:00:21 Weather safe, server is Boltwood Cloud Sensor II
07:00:21 Telescope is ACP->ACP->TMO61, driver V3
07:00:21 Dome is MaxDome
07:00:21 MaxIm DL/CCD is version 5.18
07:00:21 Imager is QSI Universal
07:00:21 Imager readout modes:
07:00:21   0 is Image Quality
07:00:21 Guider is SX Universal(internal/off-axis)
07:00:21 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
07:00:21 Calculated field of view (arcmin): H = 18.4 V = 13.8
07:00:21 Using focus offsets from FilterInfo.txt
07:00:21 ACPS Observation IRAS_19183+2339(1 of 1)
07:00:21   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan IRAS_19183+2339)
07:00:21   (turning on sidereal tracking)
07:00:21 Pointing updates are enabled
07:00:21   Start slew to IRAS_19183+2339...
07:00:22 **Script Error (Tracking has been stopped)**
07:00:22 Source:  ASCOM.SiTechDll.Telescope
07:00:22 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
07:00:22 Script Context:
07:00:22     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
07:00:22     1739:         End If
07:00:22     1740:     Else
07:00:22 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
07:00:22                   ^
07:00:22     1742:     End If
07:00:22     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
07:00:22     1744:     
07:00:22 -- end --
ACP console log closed 05-May-2017 07:00:22 UTC