ACP console log opened 05-May-2017 02:53:49 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
02:53:49 This is AcquireScheduler V3.5.2
02:53:49 Custom image file path/names are in use
02:53:49 Custom auto-flip parameters are in use
02:53:49   PreFlip=300 PostFlip=120 AF=300 PU=60
02:53:49 Hardware GEM pier side reporting is available.
02:53:50 Initializing AcquireSupport V6.0.7
02:53:50 Weather safe, server is Boltwood Cloud Sensor II
02:53:50 Telescope is ACP->ACP->TMO61, driver V3
02:53:50 Dome is MaxDome
02:53:50 MaxIm DL/CCD is version 5.18
02:53:50 Imager is QSI Universal
02:53:50 Imager readout modes:
02:53:50   0 is Image Quality
02:53:50 Guider is SX Universal(internal/off-axis)
02:53:50 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
02:53:50 Calculated field of view (arcmin): H = 18.4 V = 13.8
02:53:50 Using focus offsets from FilterInfo.txt
02:53:50 ACPS Observation HO_Cam(1 of 1)
02:53:50   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan HO_Cam)
02:53:50   (turning on sidereal tracking)
02:53:50 Pointing updates are enabled
02:53:50   Start slew to HO_Cam...
02:53:51 **Script Error (Tracking has been stopped)**
02:53:51 Source:  ASCOM.SiTechDll.Telescope
02:53:51 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
02:53:51 Script Context:
02:53:51     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
02:53:51     1739:         End If
02:53:51     1740:     Else
02:53:51 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
02:53:51                   ^
02:53:51     1742:     End If
02:53:51     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
02:53:51     1744:     
02:53:51 -- end --
ACP console log closed 05-May-2017 02:53:51 UTC