ACP console log opened 05-May-2017 02:55:49 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
02:55:49 This is AcquireScheduler V3.5.2
02:55:49 Custom image file path/names are in use
02:55:49 Custom auto-flip parameters are in use
02:55:49   PreFlip=300 PostFlip=120 AF=300 PU=60
02:55:49 Hardware GEM pier side reporting is available.
02:55:50 Initializing AcquireSupport V6.0.7
02:55:50 Weather safe, server is Boltwood Cloud Sensor II
02:55:50 Telescope is ACP->ACP->TMO61, driver V3
02:55:50 Dome is MaxDome
02:55:50 MaxIm DL/CCD is version 5.18
02:55:50 Imager is QSI Universal
02:55:50 Imager readout modes:
02:55:50   0 is Image Quality
02:55:50 Guider is SX Universal(internal/off-axis)
02:55:50 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
02:55:50 Calculated field of view (arcmin): H = 18.4 V = 13.8
02:55:50 Using focus offsets from FilterInfo.txt
02:55:50 ACPS Observation DN_Lyn(1 of 1)
02:55:50   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan DN_Lyn)
02:55:50   (turning on sidereal tracking)
02:55:50 Pointing updates are enabled
02:55:50   Start slew to DN_Lyn...
02:55:56 **Script Error (Tracking has been stopped)**
02:55:56 Source:  ASCOM.SiTechDll.Telescope
02:55:56 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
02:55:56 Script Context:
02:55:56     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
02:55:56     1739:         End If
02:55:56     1740:     Else
02:55:56 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
02:55:56                   ^
02:55:56     1742:     End If
02:55:56     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
02:55:56     1744:     
02:55:56 -- end --
ACP console log closed 05-May-2017 02:55:56 UTC