ACP console log opened 05-May-2017 02:58:55 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
02:58:55 This is AcquireScheduler V3.5.2
02:58:55 Custom image file path/names are in use
02:58:55 Custom auto-flip parameters are in use
02:58:55   PreFlip=300 PostFlip=120 AF=300 PU=60
02:58:55 Hardware GEM pier side reporting is available.
02:58:56 Initializing AcquireSupport V6.0.7
02:58:56 Weather safe, server is Boltwood Cloud Sensor II
02:58:56 Telescope is ACP->ACP->TMO61, driver V3
02:58:56 Dome is MaxDome
02:58:56 MaxIm DL/CCD is version 5.18
02:58:56 Imager is QSI Universal
02:58:56 Imager readout modes:
02:58:56   0 is Image Quality
02:58:56 Guider is SX Universal(internal/off-axis)
02:58:56 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
02:58:56 Calculated field of view (arcmin): H = 18.4 V = 13.8
02:58:56 Using focus offsets from FilterInfo.txt
02:58:56 ACPS Observation AL_Boo(1 of 1)
02:58:56   (belongs to Project AAVSO_HGUA_Miras_Manual_ver167, Plan AL_Boo)
02:58:56   (turning on sidereal tracking)
02:58:56 Pointing updates are enabled
02:58:56   Start slew to AL_Boo...
02:59:12 **Script Error (Tracking has been stopped)**
02:59:12 Source:  ASCOM.SiTechDll.Telescope
02:59:12 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
02:59:12 Script Context:
02:59:12     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
02:59:12     1739:         End If
02:59:12     1740:     Else
02:59:12 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
02:59:12                   ^
02:59:12     1742:     End If
02:59:12     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
02:59:12     1744:     
02:59:12 -- end --
ACP console log closed 05-May-2017 02:59:12 UTC