Log opened at Tue, May 07 2024 03:02:11 UTC (actual time)
Current log level is Normal
ACP Expert Scheduler Engine Version 9.0.4
Part of ACP Expert 9.0 Release
Full license: Arne Henden
2024-05-07 03:02:11.3: REAL TIME internal clock initialized at 07-May-2024 03:02:11 UTC
2024-05-07 03:02:11.3: Dispatcher started at 07-May-2024 03:02:11 UTC
2024-05-07 03:02:11.3: Loaded Constraint plugin AirMass
2024-05-07 03:02:11.3: Loaded Constraint plugin AirmassRange
2024-05-07 03:02:11.3: Loaded Constraint plugin Horizon
2024-05-07 03:02:11.3: Loaded Constraint plugin HourAngle
2024-05-07 03:02:11.3: Loaded Constraint plugin MoonAvoid
2024-05-07 03:02:11.3: Loaded Constraint plugin MoonDown
2024-05-07 03:02:11.3: Loaded Constraint plugin SkyCondition
2024-05-07 03:02:11.3: Loaded Constraint plugin TimeRange
2024-05-07 03:02:12.2: 193 plans are now pending.
2024-05-07 03:02:12.2: Attach ACP sequencer
2024-05-07 03:02:18.4: ++ Weather Safe ++
2024-05-07 03:02:19.3: ==== Dispatcher is running in NORMAL (NIGHT) mode ====
2024-05-07 03:02:19.3: Sequencer does sky flats
2024-05-07 03:02:23.5: ++ Observatory Startup ++
2024-05-07 03:02:23.5: Weather safety is now disabled
2024-05-07 03:02:23.5: Start ACP Sequencer's StartupObs script
2024-05-07 03:03:38.9: Weather safety is re-enabled
2024-05-07 03:03:38.9: Weather safety is now disabled
2024-05-07 03:03:38.9: Open the observatory dome/roof
2024-05-07 03:04:54.6: Weather safety is re-enabled
2024-05-07 03:04:54.6: Observatory startup succeeded, and dome opened successfully
2024-05-07 03:04:54.6: Periodic AF schedule reset. Interval is now 1.0 hours
2024-05-07 03:04:54.6: Last AutoFocus was completed at 07-May-2024 02:55:18 UTC
2024-05-07 03:04:54.6: Next AutoFocus in 50.4 minutes or ASAP after that.
2024-05-07 03:04:57.0: Dispatcher cycle time: 2.4 sec.
2024-05-07 03:04:57.0: Acquire data for Observation M3-V154...
2024-05-07 03:04:57.0:   (belongs to Project AAVSO_P246_KPRB_AUTO_ver3426, Plan M3-V154)
2024-05-07 03:04:57.0: Send Observation M3-V154 to ACP Sequencer
2024-05-07 03:09:46.8: Acquisition time: 289.7325996 sec.
2024-05-07 03:09:46.8: Data for Observation M3-V154 of Plan M3-V154 acquired successfully.
2024-05-07 03:09:46.8: Plan M3-V154 completed successfully.
2024-05-07 03:09:46.8: Image Efficiency: 35.9%
2024-05-07 03:09:46.8: Cycle Efficiency: 99.2%
2024-05-07 03:09:47.1: Dispatcher cycle time: 0.2 sec.
2024-05-07 03:09:47.1: Acquire data for Observation NSV-6690...
2024-05-07 03:09:47.1:   (belongs to Project AAVSO_P255_BPEC_AUTO_ver2890, Plan NSV-6690)
2024-05-07 03:09:47.1: Send Observation NSV-6690 to ACP Sequencer
2024-05-07 03:11:49.1: ACP data acquisition failed for Observation NSV-6690.
2024-05-07 03:11:49.1:   (Observation NSV-6690 interrupted by acquisition process failure.)
2024-05-07 03:11:49.4: Dispatcher cycle time: 0.2 sec.
2024-05-07 03:11:49.4: Acquire data for Observation HS1340+1524...
2024-05-07 03:11:49.4:   (belongs to Project AAVSO_MISC_PYG_AUTO_ver3260, Plan HS1340+1524)
2024-05-07 03:11:49.4: Send Observation HS1340+1524 to ACP Sequencer
2024-05-07 03:13:25.0: ACP data acquisition failed for Observation HS1340+1524.
2024-05-07 03:13:25.0:   (Observation HS1340+1524 interrupted by acquisition process failure.)
2024-05-07 03:13:25.3: Dispatcher cycle time: 0.2 sec.
2024-05-07 03:13:25.3: Acquire data for Observation X_Boo...
2024-05-07 03:13:25.3:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan X_Boo)
2024-05-07 03:13:25.3: Send Observation X_Boo to ACP Sequencer
2024-05-07 03:17:34.7: Acquisition time: 249.3311689 sec.
2024-05-07 03:17:34.7: Data for Observation X_Boo of Plan X_Boo acquired successfully.
2024-05-07 03:17:34.7: Plan X_Boo completed successfully.
2024-05-07 03:17:34.7: Image Efficiency: 18.4%
2024-05-07 03:17:34.7: Cycle Efficiency: 99.9%
2024-05-07 03:17:35.0: Dispatcher cycle time: 0.2 sec.
2024-05-07 03:17:35.0: Acquire data for Observation IR_Com...
2024-05-07 03:17:35.0:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan IR_Com)
2024-05-07 03:17:35.0: Send Observation IR_Com to ACP Sequencer
2024-05-07 03:19:10.2: ACP data acquisition failed for Observation IR_Com.
2024-05-07 03:19:10.2:   (Observation IR_Com interrupted by acquisition process failure.)
2024-05-07 03:19:10.5: Dispatcher cycle time: 0.2 sec.
2024-05-07 03:19:10.5: Acquire data for Observation U_Leo...
2024-05-07 03:19:10.5:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan U_Leo)
2024-05-07 03:19:10.5: Send Observation U_Leo to ACP Sequencer
2024-05-07 03:21:03.8: ACP data acquisition failed for Observation U_Leo.
2024-05-07 03:21:03.8:   (Observation U_Leo interrupted by acquisition process failure.)
2024-05-07 03:21:04.0: Dispatcher cycle time: 0.2 sec.
2024-05-07 03:21:04.0: Acquire data for Observation NGC_5634...
2024-05-07 03:21:04.0:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_5634)
2024-05-07 03:21:04.1: Send Observation NGC_5634 to ACP Sequencer
2024-05-07 03:24:36.8: ACP data acquisition failed for Observation NGC_5634.
2024-05-07 03:24:36.8:   (Observation NGC_5634 interrupted by acquisition process failure.)
2024-05-07 03:24:37.1: Dispatcher cycle time: 0.2 sec.
2024-05-07 03:24:37.1: Acquire data for Observation AG_Dra...
2024-05-07 03:24:37.1:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan AG_Dra)
2024-05-07 03:24:37.1: Send Observation AG_Dra to ACP Sequencer
2024-05-07 03:29:24.4: ACP data acquisition failed for Observation AG_Dra.
2024-05-07 03:29:24.4:   (Observation AG_Dra interrupted by acquisition process failure.)
2024-05-07 03:29:24.6: Dispatcher cycle time: 0.1 sec.
2024-05-07 03:29:24.6: Acquire data for Observation GZ_Cnc...
2024-05-07 03:29:24.6:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan GZ_Cnc)
2024-05-07 03:29:24.6: Send Observation GZ_Cnc to ACP Sequencer
2024-05-07 03:32:16.2: ACP data acquisition failed for Observation GZ_Cnc.
2024-05-07 03:32:16.2:   (Observation GZ_Cnc interrupted by acquisition process failure.)
2024-05-07 03:32:16.4: Dispatcher cycle time: 0.2 sec.
2024-05-07 03:32:16.4: Acquire data for Observation HS1340+1524...
2024-05-07 03:32:16.4:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan HS1340+1524)
2024-05-07 03:32:16.4: Send Observation HS1340+1524 to ACP Sequencer
2024-05-07 03:34:46.2: ACP data acquisition failed for Observation HS1340+1524.
2024-05-07 03:34:46.2:   (Observation HS1340+1524 interrupted by acquisition process failure.)
2024-05-07 03:34:46.5: Dispatcher cycle time: 0.1 sec.
2024-05-07 03:34:46.5: Acquire data for Observation SU_Lyn...
2024-05-07 03:34:46.5:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan SU_Lyn)
2024-05-07 03:34:46.5: Send Observation SU_Lyn to ACP Sequencer
2024-05-07 03:39:41.2: Acquisition time: 294.7302044 sec.
2024-05-07 03:39:41.2: Data for Observation SU_Lyn of Plan SU_Lyn acquired successfully.
2024-05-07 03:39:41.2: Plan SU_Lyn completed successfully.
2024-05-07 03:39:41.2: Image Efficiency: 18.3%
2024-05-07 03:39:41.2: Cycle Efficiency: 100.0%
2024-05-07 03:39:41.5: Dispatcher cycle time: 0.1 sec.
2024-05-07 03:39:41.5: Acquire data for Observation Mrk_180...
2024-05-07 03:39:41.5:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan Mrk_180)
2024-05-07 03:39:41.5: Send Observation Mrk_180 to ACP Sequencer
2024-05-07 03:45:34.4: Acquisition time: 352.9376944 sec.
2024-05-07 03:45:34.4: Data for Observation Mrk_180 of Plan Mrk_180 acquired successfully.
2024-05-07 03:45:34.4: Plan Mrk_180 completed successfully.
2024-05-07 03:45:34.4: Image Efficiency: 51.0%
2024-05-07 03:45:34.4: Cycle Efficiency: 100.0%
2024-05-07 03:45:34.7: Dispatcher cycle time: 0.1 sec.
2024-05-07 03:45:34.7: Acquire data for Observation M5-V42...
2024-05-07 03:45:34.7:   (belongs to Project AAVSO_P246_KPRB_AUTO_ver3426, Plan M5-V42)
2024-05-07 03:45:34.7: Send Observation M5-V42 to ACP Sequencer
2024-05-07 03:52:06.2: Acquisition time: 391.5600401 sec.
2024-05-07 03:52:06.2: Data for Observation M5-V42 of Plan M5-V42 acquired successfully.
2024-05-07 03:52:06.3: Plan M5-V42 completed successfully.
2024-05-07 03:52:06.3: Image Efficiency: 29.6%
2024-05-07 03:52:06.3: Cycle Efficiency: 100.0%
2024-05-07 03:52:06.5: Dispatcher cycle time: 0.1 sec.
2024-05-07 03:52:06.5: Acquire data for Observation M5-V84...
2024-05-07 03:52:06.5:   (belongs to Project AAVSO_P246_KPRB_AUTO_ver3426, Plan M5-V84)
2024-05-07 03:52:06.5: Send Observation M5-V84 to ACP Sequencer
2024-05-07 03:56:31.4: Acquisition time: 264.910199 sec.
2024-05-07 03:56:31.4: Data for Observation M5-V84 of Plan M5-V84 acquired successfully.
2024-05-07 03:56:31.4: Plan M5-V84 completed successfully.
2024-05-07 03:56:31.4: Image Efficiency: 50.9%
2024-05-07 03:56:31.4: Cycle Efficiency: 99.9%
2024-05-07 03:56:31.5: ++ Auto Focus ++
2024-05-07 03:56:31.5: Doing periodic autofocus.
2024-05-07 03:56:31.5: Start special ACP AutoFocus script for scheduler
2024-05-07 04:02:36.7: Next periodic autofocus ASAP after 3600sec. 07-May-2024 05:02:23 UTC
2024-05-07 04:02:36.8: Dispatcher cycle time: 0.1 sec.
2024-05-07 04:02:36.8: Acquire data for Observation Pal_5...
2024-05-07 04:02:36.8:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan Pal_5)
2024-05-07 04:02:36.8: Send Observation Pal_5 to ACP Sequencer
2024-05-07 04:07:33.0: ACP data acquisition failed for Observation Pal_5.
2024-05-07 04:07:33.0:   (Observation Pal_5 interrupted by acquisition process failure.)
2024-05-07 04:07:33.2: Dispatcher cycle time: 0.1 sec.
2024-05-07 04:07:33.2: Acquire data for Observation J072816...
2024-05-07 04:07:33.2:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan J072816)
2024-05-07 04:07:33.2: Send Observation J072816 to ACP Sequencer
2024-05-07 04:09:56.8: ACP data acquisition failed for Observation J072816.
2024-05-07 04:09:56.8:   (Observation J072816 interrupted by acquisition process failure.)
2024-05-07 04:09:57.0: Dispatcher cycle time: 0.1 sec.
2024-05-07 04:09:57.0: Acquire data for Observation S5_0716+714...
2024-05-07 04:09:57.0:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan S5_0716+714)
2024-05-07 04:09:57.0: Send Observation S5_0716+714 to ACP Sequencer
2024-05-07 04:10:12.1: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:10:12.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:10:12.1: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:10:12.1: ACP data acquisition failed for Observation S5_0716+714.
2024-05-07 04:10:12.1:   (Observation S5_0716+714 interrupted by acquisition process failure.)
2024-05-07 04:10:12.3: Dispatcher cycle time: 0.1 sec.
2024-05-07 04:10:12.3: Acquire data for Observation OJ287...
2024-05-07 04:10:12.3:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan OJ287)
2024-05-07 04:10:12.4: Send Observation OJ287 to ACP Sequencer
2024-05-07 04:10:27.4: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:10:27.4: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:10:27.4: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:10:27.4: ACP data acquisition failed for Observation OJ287.
2024-05-07 04:10:27.4:   (Observation OJ287 interrupted by acquisition process failure.)
2024-05-07 04:10:27.6: Dispatcher cycle time: 0.1 sec.
2024-05-07 04:10:27.6: Acquire data for Observation PG_1553+113...
2024-05-07 04:10:27.6:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan PG_1553+113)
2024-05-07 04:10:27.6: Send Observation PG_1553+113 to ACP Sequencer
2024-05-07 04:10:48.6: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:10:48.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:10:48.6: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:10:48.6: ACP data acquisition failed for Observation PG_1553+113.
2024-05-07 04:10:48.6:   (Observation PG_1553+113 interrupted by acquisition process failure.)
2024-05-07 04:10:48.9: Dispatcher cycle time: 0.1 sec.
2024-05-07 04:10:48.9: Acquire data for Observation SU_Lyn...
2024-05-07 04:10:48.9:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver3479, Plan SU_Lyn)
2024-05-07 04:10:48.9: Send Observation SU_Lyn to ACP Sequencer
2024-05-07 04:11:37.4: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:11:37.4: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:11:37.4: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:11:37.4: ACP data acquisition failed for Observation SU_Lyn.
2024-05-07 04:11:37.4:   (Observation SU_Lyn interrupted by acquisition process failure.)
2024-05-07 04:11:37.6: Dispatcher cycle time: 0.1 sec.
2024-05-07 04:11:37.6: Acquire data for Observation PG_1553+113...
2024-05-07 04:11:37.6:   (belongs to Project AAVSO_MISC_OAR_AUTO_ver2706, Plan PG_1553+113)
2024-05-07 04:11:37.6: Send Observation PG_1553+113 to ACP Sequencer
2024-05-07 04:12:21.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:12:21.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:12:21.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:12:21.3: ACP data acquisition failed for Observation PG_1553+113.
2024-05-07 04:12:21.3:   (Observation PG_1553+113 interrupted by acquisition process failure.)
2024-05-07 04:12:21.5: Dispatcher cycle time: 0.1 sec.
2024-05-07 04:12:21.5: Acquire data for Observation Mrk_180...
2024-05-07 04:12:21.5:   (belongs to Project AAVSO_MISC_OAR_AUTO_ver2706, Plan Mrk_180)
2024-05-07 04:12:21.5: Send Observation Mrk_180 to ACP Sequencer
2024-05-07 04:12:59.4: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:12:59.4: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:12:59.4: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:12:59.4: ACP data acquisition failed for Observation Mrk_180.
2024-05-07 04:12:59.4:   (Observation Mrk_180 interrupted by acquisition process failure.)
2024-05-07 04:12:59.6: Dispatcher cycle time: 0.0 sec.
2024-05-07 04:12:59.6: Acquire data for Observation J072816...
2024-05-07 04:12:59.6:   (belongs to Project AAVSO_MISC_WLP_AUTO_ver3464, Plan J072816)
2024-05-07 04:12:59.6: Send Observation J072816 to ACP Sequencer
2024-05-07 04:13:21.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:13:21.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:13:21.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:13:21.7: ACP data acquisition failed for Observation J072816.
2024-05-07 04:13:21.7:   (Observation J072816 interrupted by acquisition process failure.)
2024-05-07 04:13:21.9: Dispatcher cycle time: 0.1 sec.
2024-05-07 04:13:21.9: Acquire data for Observation IR_Com...
2024-05-07 04:13:21.9:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver3479, Plan IR_Com)
2024-05-07 04:13:21.9: Send Observation IR_Com to ACP Sequencer
2024-05-07 04:13:37.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:13:37.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:13:37.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:13:37.0: ACP data acquisition failed for Observation IR_Com.
2024-05-07 04:13:37.0:   (Observation IR_Com interrupted by acquisition process failure.)
2024-05-07 04:13:37.1: Dispatcher cycle time: 0.1 sec.
2024-05-07 04:13:37.1: Acquire data for Observation GZ_Cnc...
2024-05-07 04:13:37.1:   (belongs to Project AAVSO_MISC_MZK_AUTO_ver2706, Plan GZ_Cnc)
2024-05-07 04:13:37.1: Send Observation GZ_Cnc to ACP Sequencer
2024-05-07 04:14:11.4: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:14:11.4: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:14:11.4: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:14:11.4: ACP data acquisition failed for Observation GZ_Cnc.
2024-05-07 04:14:11.4:   (Observation GZ_Cnc interrupted by acquisition process failure.)
2024-05-07 04:14:11.6: Dispatcher cycle time: 0.0 sec.
2024-05-07 04:14:11.6: Acquire data for Observation U_Leo...
2024-05-07 04:14:11.6:   (belongs to Project AAVSO_MISC_SFY_AUTO_ver2706, Plan U_Leo)
2024-05-07 04:14:11.6: Send Observation U_Leo to ACP Sequencer
2024-05-07 04:14:50.4: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:14:50.4: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:14:50.4: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:14:50.4: ACP data acquisition failed for Observation U_Leo.
2024-05-07 04:14:50.4:   (Observation U_Leo interrupted by acquisition process failure.)
2024-05-07 04:14:50.5: Dispatcher cycle time: 0.0 sec.
2024-05-07 04:14:50.5: Acquire data for Observation X_Boo...
2024-05-07 04:14:50.5:   (belongs to Project AAVSO_MISC_ZTO_AUTO_ver2706, Plan X_Boo)
2024-05-07 04:14:50.5: Send Observation X_Boo to ACP Sequencer
2024-05-07 04:15:05.6: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:15:05.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:15:05.6: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:15:05.6: ACP data acquisition failed for Observation X_Boo.
2024-05-07 04:15:05.6:   (Observation X_Boo interrupted by acquisition process failure.)
2024-05-07 04:22:09.8: Dispatcher cycle time: 0.0 sec.
2024-05-07 04:22:09.8: Acquire data for Observation IX_Dra...
2024-05-07 04:22:09.8:   (belongs to Project AAVSO_P153_SFY_AUTO_ver2706, Plan IX_Dra)
2024-05-07 04:22:09.8: Send Observation IX_Dra to ACP Sequencer
2024-05-07 04:22:24.9: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:22:24.9: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:22:24.9: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:22:24.9: ACP data acquisition failed for Observation IX_Dra.
2024-05-07 04:22:24.9:   (Observation IX_Dra interrupted by acquisition process failure.)
2024-05-07 04:56:45.7: Dispatcher cycle time: 0.1 sec.
2024-05-07 04:56:45.7: Acquire data for Observation X_Ser...
2024-05-07 04:56:45.7:   (belongs to Project AAVSO_MISC_MRV_AUTO_ver3136, Plan X_Ser)
2024-05-07 04:56:45.7: Send Observation X_Ser to ACP Sequencer
2024-05-07 04:57:00.9: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:57:00.9: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:57:00.9: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:57:00.9: ACP data acquisition failed for Observation X_Ser.
2024-05-07 04:57:00.9:   (Observation X_Ser interrupted by acquisition process failure.)
2024-05-07 04:57:01.1: Dispatcher cycle time: 0.0 sec.
2024-05-07 04:57:01.1: Acquire data for Observation X_Ser...
2024-05-07 04:57:01.1:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan X_Ser)
2024-05-07 04:57:01.1: Send Observation X_Ser to ACP Sequencer
2024-05-07 04:57:27.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 04:57:27.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 04:57:27.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 04:57:27.3: ACP data acquisition failed for Observation X_Ser.
2024-05-07 04:57:27.3:   (Observation X_Ser interrupted by acquisition process failure.)
2024-05-07 05:02:31.0: ++ Auto Focus ++
2024-05-07 05:02:31.0: Doing periodic autofocus.
2024-05-07 05:02:31.0: Start special ACP AutoFocus script for scheduler
2024-05-07 05:02:46.0: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 05:02:46.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 05:02:46.0: ** Autofocus failed (n=1), will retry ASAP after 0 min.
2024-05-07 05:03:16.3: ++ Auto Focus ++
2024-05-07 05:03:16.3: Doing periodic autofocus.
2024-05-07 05:03:16.3: Start special ACP AutoFocus script for scheduler
2024-05-07 05:03:53.5: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 05:03:53.5: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 05:03:53.5: ** Autofocus failed (n=2), will retry ASAP after 5 min.
2024-05-07 05:08:56.4: ++ Auto Focus ++
2024-05-07 05:08:56.4: Doing periodic autofocus.
2024-05-07 05:08:56.4: Start special ACP AutoFocus script for scheduler
2024-05-07 05:09:11.5: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 05:09:11.5: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 05:09:11.5: ** Autofocus failed (n=3), will retry ASAP after 10 min.
2024-05-07 05:19:17.6: ++ Auto Focus ++
2024-05-07 05:19:17.6: Doing periodic autofocus.
2024-05-07 05:19:17.6: Start special ACP AutoFocus script for scheduler
2024-05-07 05:19:32.6: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 05:19:32.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 05:19:32.6: ** Autofocus failed (n=4), will retry ASAP after 15 min.
2024-05-07 05:22:04.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:22:04.4: Acquire data for Observation MV_Lyr...
2024-05-07 05:22:04.4:   (belongs to Project AAVSO_P233_DKS_AUTO_ver2623, Plan MV_Lyr)
2024-05-07 05:22:04.4: Send Observation MV_Lyr to ACP Sequencer
2024-05-07 05:22:19.5: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:22:19.5: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:22:19.5: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:22:19.5: ACP data acquisition failed for Observation MV_Lyr.
2024-05-07 05:22:19.5:   (Observation MV_Lyr interrupted by acquisition process failure.)
2024-05-07 05:25:21.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:25:21.4: Acquire data for Observation NSV_11154...
2024-05-07 05:25:21.4:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan NSV_11154)
2024-05-07 05:25:21.4: Send Observation NSV_11154 to ACP Sequencer
2024-05-07 05:25:36.5: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:25:36.5: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:25:36.5: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:25:36.5: ACP data acquisition failed for Observation NSV_11154.
2024-05-07 05:25:36.5:   (Observation NSV_11154 interrupted by acquisition process failure.)
2024-05-07 05:25:36.6: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:25:36.6: Acquire data for Observation NSV_11154...
2024-05-07 05:25:36.6:   (belongs to Project AAVSO_MISC_WEL_AUTO_ver3443, Plan NSV_11154)
2024-05-07 05:25:36.6: Send Observation NSV_11154 to ACP Sequencer
2024-05-07 05:25:51.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:25:51.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:25:51.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:25:51.7: ACP data acquisition failed for Observation NSV_11154.
2024-05-07 05:25:51.7:   (Observation NSV_11154 interrupted by acquisition process failure.)
2024-05-07 05:26:22.2: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:26:22.2: Acquire data for Observation NGC_5897...
2024-05-07 05:26:22.2:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_5897)
2024-05-07 05:26:22.2: Send Observation NGC_5897 to ACP Sequencer
2024-05-07 05:26:37.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:26:37.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:26:37.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:26:37.3: ACP data acquisition failed for Observation NGC_5897.
2024-05-07 05:26:37.3:   (Observation NGC_5897 interrupted by acquisition process failure.)
2024-05-07 05:34:42.5: ++ Auto Focus ++
2024-05-07 05:34:42.5: Doing periodic autofocus.
2024-05-07 05:34:42.5: Start special ACP AutoFocus script for scheduler
2024-05-07 05:34:57.6: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 05:34:57.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 05:34:57.6: ** Autofocus failed (n=5), will retry ASAP after 20 min.
2024-05-07 05:40:01.2: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:40:01.2: Acquire data for Observation NGC_6254...
2024-05-07 05:40:01.2:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6254)
2024-05-07 05:40:01.2: Send Observation NGC_6254 to ACP Sequencer
2024-05-07 05:40:16.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:40:16.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:40:16.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:40:16.3: ACP data acquisition failed for Observation NGC_6254.
2024-05-07 05:40:16.3:   (Observation NGC_6254 interrupted by acquisition process failure.)
2024-05-07 05:40:16.5: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:40:16.5: Acquire data for Observation NGC_6254...
2024-05-07 05:40:16.5:   (belongs to Project AAVSO_MISC_WEL_AUTO_ver3443, Plan NGC_6254)
2024-05-07 05:40:16.5: Send Observation NGC_6254 to ACP Sequencer
2024-05-07 05:40:42.8: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:40:42.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:40:42.8: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:40:42.8: ACP data acquisition failed for Observation NGC_6254.
2024-05-07 05:40:42.8:   (Observation NGC_6254 interrupted by acquisition process failure.)
2024-05-07 05:40:42.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:40:42.9: Acquire data for Observation J184706...
2024-05-07 05:40:42.9:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan J184706)
2024-05-07 05:40:42.9: Send Observation J184706 to ACP Sequencer
2024-05-07 05:40:58.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:40:58.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:40:58.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:40:58.0: ACP data acquisition failed for Observation J184706.
2024-05-07 05:40:58.0:   (Observation J184706 interrupted by acquisition process failure.)
2024-05-07 05:45:01.2: Dispatcher cycle time: 0.1 sec.
2024-05-07 05:45:01.2: Acquire data for Observation V884_Her...
2024-05-07 05:45:01.2:   (belongs to Project AAVSO_MISC_PYG_AUTO_ver3260, Plan V884_Her)
2024-05-07 05:45:01.2: Send Observation V884_Her to ACP Sequencer
2024-05-07 05:45:16.5: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:45:16.5: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:45:16.5: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:45:16.5: ACP data acquisition failed for Observation V884_Her.
2024-05-07 05:45:16.5:   (Observation V884_Her interrupted by acquisition process failure.)
2024-05-07 05:45:16.7: Dispatcher cycle time: 0.1 sec.
2024-05-07 05:45:16.7: Acquire data for Observation CG_Dra...
2024-05-07 05:45:16.7:   (belongs to Project AAVSO_P211_BENS_AUTO_ver2706, Plan CG_Dra)
2024-05-07 05:45:16.7: Send Observation CG_Dra to ACP Sequencer
2024-05-07 05:45:37.8: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:45:37.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:45:37.8: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:45:37.8: ACP data acquisition failed for Observation CG_Dra.
2024-05-07 05:45:37.8:   (Observation CG_Dra interrupted by acquisition process failure.)
2024-05-07 05:45:38.0: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:45:38.0: Acquire data for Observation V884_Her...
2024-05-07 05:45:38.0:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan V884_Her)
2024-05-07 05:45:38.0: Send Observation V884_Her to ACP Sequencer
2024-05-07 05:45:54.5: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:45:54.5: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:45:54.5: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:45:54.5: ACP data acquisition failed for Observation V884_Her.
2024-05-07 05:45:54.5:   (Observation V884_Her interrupted by acquisition process failure.)
2024-05-07 05:45:54.6: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:45:54.6: Acquire data for Observation ASAS_185038...
2024-05-07 05:45:54.6:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan ASAS_185038)
2024-05-07 05:45:54.6: Send Observation ASAS_185038 to ACP Sequencer
2024-05-07 05:46:11.2: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:46:11.2: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:46:11.2: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:46:11.2: ACP data acquisition failed for Observation ASAS_185038.
2024-05-07 05:46:11.2:   (Observation ASAS_185038 interrupted by acquisition process failure.)
2024-05-07 05:52:14.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:52:14.9: Acquire data for Observation NGC_6171...
2024-05-07 05:52:14.9:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6171)
2024-05-07 05:52:14.9: Send Observation NGC_6171 to ACP Sequencer
2024-05-07 05:52:30.1: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:52:30.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:52:30.1: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:52:30.1: ACP data acquisition failed for Observation NGC_6171.
2024-05-07 05:52:30.1:   (Observation NGC_6171 interrupted by acquisition process failure.)
2024-05-07 05:55:02.1: ++ Auto Focus ++
2024-05-07 05:55:02.1: Doing periodic autofocus.
2024-05-07 05:55:02.1: Start special ACP AutoFocus script for scheduler
2024-05-07 05:55:17.1: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 05:55:17.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 05:55:17.1: ** Autofocus failed (n=6), will retry ASAP after 20 min.
2024-05-07 05:55:47.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:55:47.4: Acquire data for Observation ASAS_190819...
2024-05-07 05:55:47.4:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan ASAS_190819)
2024-05-07 05:55:47.4: Send Observation ASAS_190819 to ACP Sequencer
2024-05-07 05:56:22.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:56:22.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:56:22.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:56:22.7: ACP data acquisition failed for Observation ASAS_190819.
2024-05-07 05:56:22.7:   (Observation ASAS_190819 interrupted by acquisition process failure.)
2024-05-07 05:56:22.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:56:22.9: Acquire data for Observation ASAS_190449...
2024-05-07 05:56:22.9:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan ASAS_190449)
2024-05-07 05:56:22.9: Send Observation ASAS_190449 to ACP Sequencer
2024-05-07 05:56:38.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:56:38.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:56:38.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:56:38.0: ACP data acquisition failed for Observation ASAS_190449.
2024-05-07 05:56:38.0:   (Observation ASAS_190449 interrupted by acquisition process failure.)
2024-05-07 05:57:38.8: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:57:38.8: Acquire data for Observation ASAS_185804...
2024-05-07 05:57:38.8:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan ASAS_185804)
2024-05-07 05:57:38.8: Send Observation ASAS_185804 to ACP Sequencer
2024-05-07 05:57:53.9: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:57:53.9: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:57:53.9: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:57:53.9: ACP data acquisition failed for Observation ASAS_185804.
2024-05-07 05:57:53.9:   (Observation ASAS_185804 interrupted by acquisition process failure.)
2024-05-07 05:58:54.6: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:58:54.6: Acquire data for Observation ASAS_190343...
2024-05-07 05:58:54.6:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan ASAS_190343)
2024-05-07 05:58:54.6: Send Observation ASAS_190343 to ACP Sequencer
2024-05-07 05:59:09.6: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:59:09.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:59:09.6: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:59:09.6: ACP data acquisition failed for Observation ASAS_190343.
2024-05-07 05:59:09.6:   (Observation ASAS_190343 interrupted by acquisition process failure.)
2024-05-07 05:59:40.0: Dispatcher cycle time: 0.0 sec.
2024-05-07 05:59:40.0: Acquire data for Observation ASAS_190522...
2024-05-07 05:59:40.0:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan ASAS_190522)
2024-05-07 05:59:40.1: Send Observation ASAS_190522 to ACP Sequencer
2024-05-07 05:59:55.2: ** ACP script "AcquireScheduler" failed:
2024-05-07 05:59:55.2: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 05:59:55.2: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 05:59:55.2: ACP data acquisition failed for Observation ASAS_190522.
2024-05-07 05:59:55.2:   (Observation ASAS_190522 interrupted by acquisition process failure.)
2024-05-07 06:00:25.7: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:00:25.7: Acquire data for Observation ASAS_191806...
2024-05-07 06:00:25.7:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan ASAS_191806)
2024-05-07 06:00:25.7: Send Observation ASAS_191806 to ACP Sequencer
2024-05-07 06:00:40.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:00:40.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:00:40.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:00:40.7: ACP data acquisition failed for Observation ASAS_191806.
2024-05-07 06:00:40.7:   (Observation ASAS_191806 interrupted by acquisition process failure.)
2024-05-07 06:00:40.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:00:40.9: Acquire data for Observation J190253...
2024-05-07 06:00:40.9:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan J190253)
2024-05-07 06:00:40.9: Send Observation J190253 to ACP Sequencer
2024-05-07 06:00:56.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:00:56.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:00:56.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:00:56.0: ACP data acquisition failed for Observation J190253.
2024-05-07 06:00:56.0:   (Observation J190253 interrupted by acquisition process failure.)
2024-05-07 06:05:29.0: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:05:29.0: Acquire data for Observation ASAS_190148...
2024-05-07 06:05:29.0:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan ASAS_190148)
2024-05-07 06:05:29.0: Send Observation ASAS_190148 to ACP Sequencer
2024-05-07 06:05:44.1: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:05:44.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:05:44.1: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:05:44.1: ACP data acquisition failed for Observation ASAS_190148.
2024-05-07 06:05:44.1:   (Observation ASAS_190148 interrupted by acquisition process failure.)
2024-05-07 06:09:16.2: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:09:16.2: Acquire data for Observation U_Sco...
2024-05-07 06:09:16.2:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan U_Sco)
2024-05-07 06:09:16.3: Send Observation U_Sco to ACP Sequencer
2024-05-07 06:09:31.4: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:09:31.4: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:09:31.4: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:09:31.4: ACP data acquisition failed for Observation U_Sco.
2024-05-07 06:09:31.4:   (Observation U_Sco interrupted by acquisition process failure.)
2024-05-07 06:12:33.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:12:33.4: Acquire data for Observation V2279_Cyg...
2024-05-07 06:12:33.4:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan V2279_Cyg)
2024-05-07 06:12:33.4: Send Observation V2279_Cyg to ACP Sequencer
2024-05-07 06:12:48.5: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:12:48.5: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:12:48.5: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:12:48.5: ACP data acquisition failed for Observation V2279_Cyg.
2024-05-07 06:12:48.5:   (Observation V2279_Cyg interrupted by acquisition process failure.)
2024-05-07 06:13:19.0: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:13:19.0: Acquire data for Observation HR_Lyr...
2024-05-07 06:13:19.0:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan HR_Lyr)
2024-05-07 06:13:19.0: Send Observation HR_Lyr to ACP Sequencer
2024-05-07 06:13:34.1: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:13:34.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:13:34.1: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:13:34.1: ACP data acquisition failed for Observation HR_Lyr.
2024-05-07 06:13:34.1:   (Observation HR_Lyr interrupted by acquisition process failure.)
2024-05-07 06:13:34.3: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:13:34.3: Acquire data for Observation HR_Lyr...
2024-05-07 06:13:34.3:   (belongs to Project AAVSO_MISC_SFY_AUTO_ver2706, Plan HR_Lyr)
2024-05-07 06:13:34.3: Send Observation HR_Lyr to ACP Sequencer
2024-05-07 06:13:49.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:13:49.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:13:49.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:13:49.4: ACP data acquisition failed for Observation HR_Lyr.
2024-05-07 06:13:49.4:   (Observation HR_Lyr interrupted by acquisition process failure.)
2024-05-07 06:14:19.8: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:14:19.8: Acquire data for Observation NGC_6366...
2024-05-07 06:14:19.8:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6366)
2024-05-07 06:14:19.8: Send Observation NGC_6366 to ACP Sequencer
2024-05-07 06:14:34.9: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:14:34.9: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:14:34.9: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:14:34.9: ACP data acquisition failed for Observation NGC_6366.
2024-05-07 06:14:34.9:   (Observation NGC_6366 interrupted by acquisition process failure.)
2024-05-07 06:15:35.6: ++ Auto Focus ++
2024-05-07 06:15:35.7: Doing periodic autofocus.
2024-05-07 06:15:35.7: Start special ACP AutoFocus script for scheduler
2024-05-07 06:15:50.7: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 06:15:50.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 06:15:50.7: ** Autofocus failed (n=7), will retry ASAP after 20 min.
2024-05-07 06:16:51.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:16:51.4: Acquire data for Observation ASAS_192000...
2024-05-07 06:16:51.4:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan ASAS_192000)
2024-05-07 06:16:51.4: Send Observation ASAS_192000 to ACP Sequencer
2024-05-07 06:17:06.5: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:17:06.5: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:17:06.5: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:17:06.5: ACP data acquisition failed for Observation ASAS_192000.
2024-05-07 06:17:06.5:   (Observation ASAS_192000 interrupted by acquisition process failure.)
2024-05-07 06:17:36.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:17:36.9: Acquire data for Observation NGC_6402...
2024-05-07 06:17:36.9:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6402)
2024-05-07 06:17:37.0: Send Observation NGC_6402 to ACP Sequencer
2024-05-07 06:17:52.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:17:52.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:17:52.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:17:52.0: ACP data acquisition failed for Observation NGC_6402.
2024-05-07 06:17:52.0:   (Observation NGC_6402 interrupted by acquisition process failure.)
2024-05-07 06:31:30.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:31:30.9: Acquire data for Observation V0406_Vul...
2024-05-07 06:31:30.9:   (belongs to Project AAVSO_P194_BPEC_AUTO_ver2706, Plan V0406_Vul)
2024-05-07 06:31:30.9: Send Observation V0406_Vul to ACP Sequencer
2024-05-07 06:31:46.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:31:46.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:31:46.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:31:46.0: ACP data acquisition failed for Observation V0406_Vul.
2024-05-07 06:31:46.0:   (Observation V0406_Vul interrupted by acquisition process failure.)
2024-05-07 06:32:16.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:32:16.4: Acquire data for Observation J193019...
2024-05-07 06:32:16.4:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan J193019)
2024-05-07 06:32:16.4: Send Observation J193019 to ACP Sequencer
2024-05-07 06:32:35.8: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:32:35.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:32:35.8: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:32:35.8: ACP data acquisition failed for Observation J193019.
2024-05-07 06:32:35.8:   (Observation J193019 interrupted by acquisition process failure.)
2024-05-07 06:32:35.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:32:35.9: Acquire data for Observation J193835...
2024-05-07 06:32:35.9:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan J193835)
2024-05-07 06:32:35.9: Send Observation J193835 to ACP Sequencer
2024-05-07 06:32:57.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:32:57.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:32:57.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:32:57.7: ACP data acquisition failed for Observation J193835.
2024-05-07 06:32:57.7:   (Observation J193835 interrupted by acquisition process failure.)
2024-05-07 06:33:58.5: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:33:58.5: Acquire data for Observation NGC_6535...
2024-05-07 06:33:58.5:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6535)
2024-05-07 06:33:58.5: Send Observation NGC_6535 to ACP Sequencer
2024-05-07 06:34:13.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:34:13.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:34:13.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:34:13.7: ACP data acquisition failed for Observation NGC_6535.
2024-05-07 06:34:13.7:   (Observation NGC_6535 interrupted by acquisition process failure.)
2024-05-07 06:34:44.2: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:34:44.2: Acquire data for Observation M56_V6...
2024-05-07 06:34:44.2:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan M56_V6)
2024-05-07 06:34:44.2: Send Observation M56_V6 to ACP Sequencer
2024-05-07 06:35:14.8: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:35:14.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:35:14.8: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:35:14.8: ACP data acquisition failed for Observation M56_V6.
2024-05-07 06:35:14.8:   (Observation M56_V6 interrupted by acquisition process failure.)
2024-05-07 06:35:15.0: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:35:15.0: Acquire data for Observation M56_V6...
2024-05-07 06:35:15.0:   (belongs to Project AAVSO_MISC_HJZ_AUTO_ver2706, Plan M56_V6)
2024-05-07 06:35:15.0: Send Observation M56_V6 to ACP Sequencer
2024-05-07 06:35:36.9: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:35:36.9: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:35:36.9: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:35:36.9: ACP data acquisition failed for Observation M56_V6.
2024-05-07 06:35:36.9:   (Observation M56_V6 interrupted by acquisition process failure.)
2024-05-07 06:36:07.3: ++ Auto Focus ++
2024-05-07 06:36:07.3: Doing periodic autofocus.
2024-05-07 06:36:07.3: Start special ACP AutoFocus script for scheduler
2024-05-07 06:36:22.4: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 06:36:22.4: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 06:36:22.4: ** Autofocus failed (n=8), will retry ASAP after 20 min.
2024-05-07 06:42:56.7: Dispatcher cycle time: 0.1 sec.
2024-05-07 06:42:56.7: Acquire data for Observation NGC_6093...
2024-05-07 06:42:56.7:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6093)
2024-05-07 06:42:56.7: Send Observation NGC_6093 to ACP Sequencer
2024-05-07 06:43:11.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:43:11.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:43:11.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:43:11.7: ACP data acquisition failed for Observation NGC_6093.
2024-05-07 06:43:11.7:   (Observation NGC_6093 interrupted by acquisition process failure.)
2024-05-07 06:43:11.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:43:11.9: Acquire data for Observation V1154_Cyg...
2024-05-07 06:43:11.9:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan V1154_Cyg)
2024-05-07 06:43:11.9: Send Observation V1154_Cyg to ACP Sequencer
2024-05-07 06:43:43.6: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:43:43.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:43:43.6: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:43:43.6: ACP data acquisition failed for Observation V1154_Cyg.
2024-05-07 06:43:43.6:   (Observation V1154_Cyg interrupted by acquisition process failure.)
2024-05-07 06:43:43.8: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:43:43.8: Acquire data for Observation HAT199_01773...
2024-05-07 06:43:43.8:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan HAT199_01773)
2024-05-07 06:43:43.8: Send Observation HAT199_01773 to ACP Sequencer
2024-05-07 06:44:11.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:44:11.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:44:11.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:44:11.3: ACP data acquisition failed for Observation HAT199_01773.
2024-05-07 06:44:11.3:   (Observation HAT199_01773 interrupted by acquisition process failure.)
2024-05-07 06:49:45.1: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:49:45.1: Acquire data for Observation HAT199_07111...
2024-05-07 06:49:45.1:   (belongs to Project AAVSO_Kepler_HQA_AUTO_ver3388, Plan HAT199_07111)
2024-05-07 06:49:45.1: Send Observation HAT199_07111 to ACP Sequencer
2024-05-07 06:50:00.1: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:50:00.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:50:00.1: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:50:00.1: ACP data acquisition failed for Observation HAT199_07111.
2024-05-07 06:50:00.1:   (Observation HAT199_07111 interrupted by acquisition process failure.)
2024-05-07 06:53:02.1: Dispatcher cycle time: 0.2 sec.
2024-05-07 06:53:02.1: Acquire data for Observation PV_Cep...
2024-05-07 06:53:02.1:   (belongs to Project AAVSO_MISC_SGUA_AUTO_ver2821, Plan PV_Cep)
2024-05-07 06:53:02.1: Send Observation PV_Cep to ACP Sequencer
2024-05-07 06:53:17.2: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:53:17.2: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:53:17.2: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:53:17.2: ACP data acquisition failed for Observation PV_Cep.
2024-05-07 06:53:17.2:   (Observation PV_Cep interrupted by acquisition process failure.)
2024-05-07 06:53:17.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:53:17.4: Acquire data for Observation PV_Cep...
2024-05-07 06:53:17.4:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan PV_Cep)
2024-05-07 06:53:17.4: Send Observation PV_Cep to ACP Sequencer
2024-05-07 06:53:32.4: ** ACP script "AcquireScheduler" failed:
2024-05-07 06:53:32.4: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 06:53:32.4: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 06:53:32.4: ACP data acquisition failed for Observation PV_Cep.
2024-05-07 06:53:32.4:   (Observation PV_Cep interrupted by acquisition process failure.)
2024-05-07 06:56:34.3: ++ Auto Focus ++
2024-05-07 06:56:34.3: Doing periodic autofocus.
2024-05-07 06:56:34.3: Start special ACP AutoFocus script for scheduler
2024-05-07 06:56:49.3: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 06:56:49.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 06:56:49.3: ** Autofocus failed (n=9), will retry ASAP after 20 min.
2024-05-07 06:59:51.2: Dispatcher cycle time: 0.0 sec.
2024-05-07 06:59:51.2: Acquire data for Observation KU_Cyg...
2024-05-07 06:59:51.2:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan KU_Cyg)
2024-05-07 06:59:51.2: Send Observation KU_Cyg to ACP Sequencer
2024-05-07 07:00:06.5: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:00:06.5: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:00:06.5: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:00:06.5: ACP data acquisition failed for Observation KU_Cyg.
2024-05-07 07:00:06.5:   (Observation KU_Cyg interrupted by acquisition process failure.)
2024-05-07 07:00:06.7: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:00:06.7: Acquire data for Observation KU_Cyg...
2024-05-07 07:00:06.7:   (belongs to Project AAVSO_MISC_MCJA_AUTO_ver2706, Plan KU_Cyg)
2024-05-07 07:00:06.7: Send Observation KU_Cyg to ACP Sequencer
2024-05-07 07:00:21.8: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:00:21.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:00:21.8: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:00:21.8: ACP data acquisition failed for Observation KU_Cyg.
2024-05-07 07:00:21.8:   (Observation KU_Cyg interrupted by acquisition process failure.)
2024-05-07 07:03:23.7: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:03:23.7: Acquire data for Observation KP_Cyg...
2024-05-07 07:03:23.7:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan KP_Cyg)
2024-05-07 07:03:23.7: Send Observation KP_Cyg to ACP Sequencer
2024-05-07 07:03:38.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:03:38.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:03:38.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:03:38.7: ACP data acquisition failed for Observation KP_Cyg.
2024-05-07 07:03:38.7:   (Observation KP_Cyg interrupted by acquisition process failure.)
2024-05-07 07:03:38.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:03:38.9: Acquire data for Observation KP_Cyg...
2024-05-07 07:03:38.9:   (belongs to Project AAVSO_MISC_WEL_AUTO_ver3443, Plan KP_Cyg)
2024-05-07 07:03:38.9: Send Observation KP_Cyg to ACP Sequencer
2024-05-07 07:03:54.2: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:03:54.2: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:03:54.2: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:03:54.2: ACP data acquisition failed for Observation KP_Cyg.
2024-05-07 07:03:54.2:   (Observation KP_Cyg interrupted by acquisition process failure.)
2024-05-07 07:04:55.0: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:04:55.0: Acquire data for Observation IC_1276...
2024-05-07 07:04:55.0:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan IC_1276)
2024-05-07 07:04:55.0: Send Observation IC_1276 to ACP Sequencer
2024-05-07 07:05:10.1: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:05:10.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:05:10.1: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:05:10.1: ACP data acquisition failed for Observation IC_1276.
2024-05-07 07:05:10.1:   (Observation IC_1276 interrupted by acquisition process failure.)
2024-05-07 07:09:43.2: Dispatcher cycle time: 0.1 sec.
2024-05-07 07:09:43.2: Acquire data for Observation NGC_6356...
2024-05-07 07:09:43.2:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6356)
2024-05-07 07:09:43.2: Send Observation NGC_6356 to ACP Sequencer
2024-05-07 07:09:58.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:09:58.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:09:58.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:09:58.3: ACP data acquisition failed for Observation NGC_6356.
2024-05-07 07:09:58.3:   (Observation NGC_6356 interrupted by acquisition process failure.)
2024-05-07 07:09:58.5: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:09:58.5: Acquire data for Observation NGC_6333...
2024-05-07 07:09:58.5:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6333)
2024-05-07 07:09:58.5: Send Observation NGC_6333 to ACP Sequencer
2024-05-07 07:10:29.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:10:29.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:10:29.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:10:29.7: ACP data acquisition failed for Observation NGC_6333.
2024-05-07 07:10:29.7:   (Observation NGC_6333 interrupted by acquisition process failure.)
2024-05-07 07:12:00.8: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:12:00.8: Acquire data for Observation NGC_6235...
2024-05-07 07:12:00.8:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6235)
2024-05-07 07:12:00.8: Send Observation NGC_6235 to ACP Sequencer
2024-05-07 07:12:15.9: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:12:15.9: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:12:15.9: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:12:15.9: ACP data acquisition failed for Observation NGC_6235.
2024-05-07 07:12:15.9:   (Observation NGC_6235 interrupted by acquisition process failure.)
2024-05-07 07:13:47.0: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:13:47.0: Acquire data for Observation V1687_Cyg...
2024-05-07 07:13:47.0:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan V1687_Cyg)
2024-05-07 07:13:47.0: Send Observation V1687_Cyg to ACP Sequencer
2024-05-07 07:14:02.1: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:14:02.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:14:02.1: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:14:02.1: ACP data acquisition failed for Observation V1687_Cyg.
2024-05-07 07:14:02.1:   (Observation V1687_Cyg interrupted by acquisition process failure.)
2024-05-07 07:14:02.2: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:14:02.2: Acquire data for Observation V1687_Cyg...
2024-05-07 07:14:02.2:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver3479, Plan V1687_Cyg)
2024-05-07 07:14:02.2: Send Observation V1687_Cyg to ACP Sequencer
2024-05-07 07:14:17.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:14:17.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:14:17.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:14:17.7: ACP data acquisition failed for Observation V1687_Cyg.
2024-05-07 07:14:17.7:   (Observation V1687_Cyg interrupted by acquisition process failure.)
2024-05-07 07:16:49.5: ++ Auto Focus ++
2024-05-07 07:16:49.6: Doing periodic autofocus.
2024-05-07 07:16:49.6: Start special ACP AutoFocus script for scheduler
2024-05-07 07:17:04.6: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 07:17:04.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 07:17:04.6: ** Autofocus failed (n=10), will retry ASAP after 20 min.
2024-05-07 07:21:37.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:21:37.4: Acquire data for Observation PNV_17291350...
2024-05-07 07:21:37.4:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan PNV_17291350)
2024-05-07 07:21:37.4: Doing 3 sets
2024-05-07 07:21:37.4: Send Observation PNV_17291350 to ACP Sequencer
2024-05-07 07:21:52.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:21:52.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:21:52.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:21:52.7: ACP data acquisition failed for Observation PNV_17291350.
2024-05-07 07:21:52.7:   (Observation PNV_17291350 interrupted by acquisition process failure.)
2024-05-07 07:28:26.3: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:28:26.3: Acquire data for Observation NGC_6287...
2024-05-07 07:28:26.3:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6287)
2024-05-07 07:28:26.3: Send Observation NGC_6287 to ACP Sequencer
2024-05-07 07:28:41.5: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:28:41.5: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:28:41.5: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:28:41.5: ACP data acquisition failed for Observation NGC_6287.
2024-05-07 07:28:41.5:   (Observation NGC_6287 interrupted by acquisition process failure.)
2024-05-07 07:28:41.7: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:28:41.7: Acquire data for Observation MN84...
2024-05-07 07:28:41.7:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan MN84)
2024-05-07 07:28:41.7: Send Observation MN84 to ACP Sequencer
2024-05-07 07:29:18.8: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:29:18.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:29:18.8: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:29:18.8: ACP data acquisition failed for Observation MN84.
2024-05-07 07:29:18.8:   (Observation MN84 interrupted by acquisition process failure.)
2024-05-07 07:29:18.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:29:18.9: Acquire data for Observation MN84...
2024-05-07 07:29:18.9:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver3479, Plan MN84)
2024-05-07 07:29:18.9: Send Observation MN84 to ACP Sequencer
2024-05-07 07:29:34.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:29:34.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:29:34.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:29:34.0: ACP data acquisition failed for Observation MN84.
2024-05-07 07:29:34.0:   (Observation MN84 interrupted by acquisition process failure.)
2024-05-07 07:31:05.3: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:31:05.3: Acquire data for Observation NGC_6144...
2024-05-07 07:31:05.3:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6144)
2024-05-07 07:31:05.3: Send Observation NGC_6144 to ACP Sequencer
2024-05-07 07:31:20.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:31:20.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:31:20.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:31:20.3: ACP data acquisition failed for Observation NGC_6144.
2024-05-07 07:31:20.3:   (Observation NGC_6144 interrupted by acquisition process failure.)
2024-05-07 07:35:23.2: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:35:23.2: Acquire data for Observation RS_Sge...
2024-05-07 07:35:23.2:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan RS_Sge)
2024-05-07 07:35:23.2: Send Observation RS_Sge to ACP Sequencer
2024-05-07 07:35:38.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:35:38.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:35:38.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:35:38.3: ACP data acquisition failed for Observation RS_Sge.
2024-05-07 07:35:38.3:   (Observation RS_Sge interrupted by acquisition process failure.)
2024-05-07 07:35:38.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:35:38.4: Acquire data for Observation RS_Sge...
2024-05-07 07:35:38.4:   (belongs to Project AAVSO_MISC_HJZ_AUTO_ver2706, Plan RS_Sge)
2024-05-07 07:35:38.4: Send Observation RS_Sge to ACP Sequencer
2024-05-07 07:35:59.4: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:35:59.4: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:35:59.4: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:35:59.4: ACP data acquisition failed for Observation RS_Sge.
2024-05-07 07:35:59.4:   (Observation RS_Sge interrupted by acquisition process failure.)
2024-05-07 07:36:29.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:36:29.9: Acquire data for Observation NSV_11749...
2024-05-07 07:36:29.9:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan NSV_11749)
2024-05-07 07:36:29.9: Send Observation NSV_11749 to ACP Sequencer
2024-05-07 07:36:45.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:36:45.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:36:45.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:36:45.0: ACP data acquisition failed for Observation NSV_11749.
2024-05-07 07:36:45.0:   (Observation NSV_11749 interrupted by acquisition process failure.)
2024-05-07 07:36:45.1: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:36:45.1: Acquire data for Observation NSV_11749...
2024-05-07 07:36:45.1:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver3479, Plan NSV_11749)
2024-05-07 07:36:45.2: Send Observation NSV_11749 to ACP Sequencer
2024-05-07 07:37:11.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:37:11.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:37:11.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:37:11.0: ACP data acquisition failed for Observation NSV_11749.
2024-05-07 07:37:11.0:   (Observation NSV_11749 interrupted by acquisition process failure.)
2024-05-07 07:37:11.1: ++ Auto Focus ++
2024-05-07 07:37:11.2: Doing periodic autofocus.
2024-05-07 07:37:11.2: Start special ACP AutoFocus script for scheduler
2024-05-07 07:37:26.2: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 07:37:26.2: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 07:37:26.2: ** Autofocus failed (n=11), will retry ASAP after 20 min.
2024-05-07 07:44:00.0: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:44:00.0: Acquire data for Observation V2492_Cyg...
2024-05-07 07:44:00.0:   (belongs to Project AAVSO_MISC_SGUA_AUTO_ver2821, Plan V2492_Cyg)
2024-05-07 07:44:00.0: Send Observation V2492_Cyg to ACP Sequencer
2024-05-07 07:44:15.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:44:15.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:44:15.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:44:15.0: ACP data acquisition failed for Observation V2492_Cyg.
2024-05-07 07:44:15.0:   (Observation V2492_Cyg interrupted by acquisition process failure.)
2024-05-07 07:44:15.2: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:44:15.2: Acquire data for Observation V2492_Cyg...
2024-05-07 07:44:15.2:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan V2492_Cyg)
2024-05-07 07:44:15.2: Send Observation V2492_Cyg to ACP Sequencer
2024-05-07 07:44:30.4: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:44:30.4: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:44:30.4: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:44:30.4: ACP data acquisition failed for Observation V2492_Cyg.
2024-05-07 07:44:30.4:   (Observation V2492_Cyg interrupted by acquisition process failure.)
2024-05-07 07:46:01.5: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:46:01.5: Acquire data for Observation FY_Aql...
2024-05-07 07:46:01.5:   (belongs to Project AAVSO_P192_SFRA_AUTO_ver2413, Plan FY_Aql)
2024-05-07 07:46:01.5: Send Observation FY_Aql to ACP Sequencer
2024-05-07 07:46:16.6: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:46:16.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:46:16.6: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:46:16.6: ACP data acquisition failed for Observation FY_Aql.
2024-05-07 07:46:16.6:   (Observation FY_Aql interrupted by acquisition process failure.)
2024-05-07 07:46:16.7: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:46:16.7: Acquire data for Observation V413_Aql...
2024-05-07 07:46:16.7:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan V413_Aql)
2024-05-07 07:46:16.7: Send Observation V413_Aql to ACP Sequencer
2024-05-07 07:46:43.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:46:43.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:46:43.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:46:43.0: ACP data acquisition failed for Observation V413_Aql.
2024-05-07 07:46:43.0:   (Observation V413_Aql interrupted by acquisition process failure.)
2024-05-07 07:46:43.2: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:46:43.2: Acquire data for Observation V413_Aql...
2024-05-07 07:46:43.2:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver3479, Plan V413_Aql)
2024-05-07 07:46:43.2: Send Observation V413_Aql to ACP Sequencer
2024-05-07 07:46:58.2: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:46:58.2: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:46:58.2: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:46:58.3: ACP data acquisition failed for Observation V413_Aql.
2024-05-07 07:46:58.3:   (Observation V413_Aql interrupted by acquisition process failure.)
2024-05-07 07:50:00.1: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:50:00.1: Acquire data for Observation NGC_6284...
2024-05-07 07:50:00.1:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6284)
2024-05-07 07:50:00.1: Send Observation NGC_6284 to ACP Sequencer
2024-05-07 07:50:15.1: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:50:15.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:50:15.1: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:50:15.1: ACP data acquisition failed for Observation NGC_6284.
2024-05-07 07:50:15.1:   (Observation NGC_6284 interrupted by acquisition process failure.)
2024-05-07 07:51:15.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:51:15.9: Acquire data for Observation V2493_Cyg...
2024-05-07 07:51:15.9:   (belongs to Project AAVSO_MISC_SGUA_AUTO_ver2821, Plan V2493_Cyg)
2024-05-07 07:51:15.9: Send Observation V2493_Cyg to ACP Sequencer
2024-05-07 07:51:43.1: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:51:43.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:51:43.1: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:51:43.1: ACP data acquisition failed for Observation V2493_Cyg.
2024-05-07 07:51:43.1:   (Observation V2493_Cyg interrupted by acquisition process failure.)
2024-05-07 07:51:43.2: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:51:43.2: Acquire data for Observation V2493_Cyg...
2024-05-07 07:51:43.2:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan V2493_Cyg)
2024-05-07 07:51:43.2: Send Observation V2493_Cyg to ACP Sequencer
2024-05-07 07:51:59.9: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:51:59.9: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:51:59.9: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:51:59.9: ACP data acquisition failed for Observation V2493_Cyg.
2024-05-07 07:51:59.9:   (Observation V2493_Cyg interrupted by acquisition process failure.)
2024-05-07 07:52:00.0: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:52:00.0: Acquire data for Observation V407_Cyg...
2024-05-07 07:52:00.0:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan V407_Cyg)
2024-05-07 07:52:00.0: Send Observation V407_Cyg to ACP Sequencer
2024-05-07 07:52:15.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:52:15.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:52:15.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:52:15.3: ACP data acquisition failed for Observation V407_Cyg.
2024-05-07 07:52:15.3:   (Observation V407_Cyg interrupted by acquisition process failure.)
2024-05-07 07:52:15.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:52:15.4: Acquire data for Observation V407_Cyg...
2024-05-07 07:52:15.4:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver3479, Plan V407_Cyg)
2024-05-07 07:52:15.4: Send Observation V407_Cyg to ACP Sequencer
2024-05-07 07:52:37.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:52:37.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:52:37.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:52:37.3: ACP data acquisition failed for Observation V407_Cyg.
2024-05-07 07:52:37.3:   (Observation V407_Cyg interrupted by acquisition process failure.)
2024-05-07 07:53:07.7: Dispatcher cycle time: 0.0 sec.
2024-05-07 07:53:07.7: Acquire data for Observation NGC_6712...
2024-05-07 07:53:07.7:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6712)
2024-05-07 07:53:07.7: Send Observation NGC_6712 to ACP Sequencer
2024-05-07 07:53:22.8: ** ACP script "AcquireScheduler" failed:
2024-05-07 07:53:22.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 07:53:22.8: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 07:53:22.8: ACP data acquisition failed for Observation NGC_6712.
2024-05-07 07:53:22.8:   (Observation NGC_6712 interrupted by acquisition process failure.)
2024-05-07 07:57:55.7: ++ Auto Focus ++
2024-05-07 07:57:55.8: Doing periodic autofocus.
2024-05-07 07:57:55.8: Start special ACP AutoFocus script for scheduler
2024-05-07 07:58:10.8: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 07:58:10.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 07:58:10.8: ** Autofocus failed (n=12), will retry ASAP after 20 min.
2024-05-07 08:01:12.7: Dispatcher cycle time: 0.0 sec.
2024-05-07 08:01:12.7: Acquire data for Observation HD168418...
2024-05-07 08:01:12.7:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan HD168418)
2024-05-07 08:01:12.7: Send Observation HD168418 to ACP Sequencer
2024-05-07 08:01:27.8: ** ACP script "AcquireScheduler" failed:
2024-05-07 08:01:27.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 08:01:27.8: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 08:01:27.8: ACP data acquisition failed for Observation HD168418.
2024-05-07 08:01:27.8:   (Observation HD168418 interrupted by acquisition process failure.)
2024-05-07 08:01:28.0: Dispatcher cycle time: 0.0 sec.
2024-05-07 08:01:28.0: Acquire data for Observation HD168418...
2024-05-07 08:01:28.0:   (belongs to Project AAVSO_MISC_RNO_AUTO_ver3443, Plan HD168418)
2024-05-07 08:01:28.0: Send Observation HD168418 to ACP Sequencer
2024-05-07 08:01:59.8: ** ACP script "AcquireScheduler" failed:
2024-05-07 08:01:59.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 08:01:59.8: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 08:01:59.8: ACP data acquisition failed for Observation HD168418.
2024-05-07 08:01:59.8:   (Observation HD168418 interrupted by acquisition process failure.)
2024-05-07 08:14:06.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 08:14:06.9: Acquire data for Observation NGC_6401...
2024-05-07 08:14:06.9:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6401)
2024-05-07 08:14:06.9: Send Observation NGC_6401 to ACP Sequencer
2024-05-07 08:14:22.1: ** ACP script "AcquireScheduler" failed:
2024-05-07 08:14:22.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 08:14:22.1: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 08:14:22.1: ACP data acquisition failed for Observation NGC_6401.
2024-05-07 08:14:22.1:   (Observation NGC_6401 interrupted by acquisition process failure.)
2024-05-07 08:18:24.6: ++ Auto Focus ++
2024-05-07 08:18:24.6: Doing periodic autofocus.
2024-05-07 08:18:24.6: Start special ACP AutoFocus script for scheduler
2024-05-07 08:18:39.7: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 08:18:39.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 08:18:39.7: ** Autofocus failed (n=13), will retry ASAP after 20 min.
2024-05-07 08:18:39.7: Dispatcher cycle time: 0.0 sec.
2024-05-07 08:18:39.7: Acquire data for Observation BO_Cep...
2024-05-07 08:18:39.7:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver3479, Plan BO_Cep)
2024-05-07 08:18:39.7: Send Observation BO_Cep to ACP Sequencer
2024-05-07 08:19:06.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 08:19:06.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 08:19:06.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 08:19:06.3: ACP data acquisition failed for Observation BO_Cep.
2024-05-07 08:19:06.3:   (Observation BO_Cep interrupted by acquisition process failure.)
2024-05-07 08:23:39.1: Dispatcher cycle time: 0.1 sec.
2024-05-07 08:23:39.1: Acquire data for Observation V1412_Aql...
2024-05-07 08:23:39.1:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan V1412_Aql)
2024-05-07 08:23:39.1: Send Observation V1412_Aql to ACP Sequencer
2024-05-07 08:23:54.2: ** ACP script "AcquireScheduler" failed:
2024-05-07 08:23:54.2: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 08:23:54.2: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 08:23:54.2: ACP data acquisition failed for Observation V1412_Aql.
2024-05-07 08:23:54.2:   (Observation V1412_Aql interrupted by acquisition process failure.)
2024-05-07 08:23:54.3: Dispatcher cycle time: 0.0 sec.
2024-05-07 08:23:54.3: Acquire data for Observation V1412_Aql...
2024-05-07 08:23:54.3:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver3479, Plan V1412_Aql)
2024-05-07 08:23:54.3: Send Observation V1412_Aql to ACP Sequencer
2024-05-07 08:24:15.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 08:24:15.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 08:24:15.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 08:24:15.0: ACP data acquisition failed for Observation V1412_Aql.
2024-05-07 08:24:15.0:   (Observation V1412_Aql interrupted by acquisition process failure.)
2024-05-07 08:33:51.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 08:33:51.4: Acquire data for Observation Ter_5...
2024-05-07 08:33:51.4:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan Ter_5)
2024-05-07 08:33:51.4: Send Observation Ter_5 to ACP Sequencer
2024-05-07 08:34:06.7: ** ACP script "AcquireScheduler" failed:
2024-05-07 08:34:06.7: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 08:34:06.7: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 08:34:06.7: ACP data acquisition failed for Observation Ter_5.
2024-05-07 08:34:06.7:   (Observation Ter_5 interrupted by acquisition process failure.)
2024-05-07 08:36:08.0: Dispatcher cycle time: 0.1 sec.
2024-05-07 08:36:08.0: Acquire data for Observation SS_Cyg...
2024-05-07 08:36:08.0:   (belongs to Project AAVSO_MISC_HQA_AUTO_ver3479, Plan SS_Cyg)
2024-05-07 08:36:08.0: Send Observation SS_Cyg to ACP Sequencer
2024-05-07 08:36:23.1: ** ACP script "AcquireScheduler" failed:
2024-05-07 08:36:23.1: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 08:36:23.1: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 08:36:23.1: ACP data acquisition failed for Observation SS_Cyg.
2024-05-07 08:36:23.1:   (Observation SS_Cyg interrupted by acquisition process failure.)
2024-05-07 08:38:54.9: ++ Auto Focus ++
2024-05-07 08:38:54.9: Doing periodic autofocus.
2024-05-07 08:38:54.9: Start special ACP AutoFocus script for scheduler
2024-05-07 08:39:10.0: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 08:39:10.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 08:39:10.0: ** Autofocus failed (n=14), will retry ASAP after 20 min.
2024-05-07 08:44:43.1: Dispatcher cycle time: 0.0 sec.
2024-05-07 08:44:43.1: Acquire data for Observation V5631_Sgr...
2024-05-07 08:44:43.1:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan V5631_Sgr)
2024-05-07 08:44:43.1: Send Observation V5631_Sgr to ACP Sequencer
2024-05-07 08:44:58.2: ** ACP script "AcquireScheduler" failed:
2024-05-07 08:44:58.2: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 08:44:58.2: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 08:44:58.2: ACP data acquisition failed for Observation V5631_Sgr.
2024-05-07 08:44:58.2:   (Observation V5631_Sgr interrupted by acquisition process failure.)
2024-05-07 08:55:35.3: Dispatcher cycle time: 0.0 sec.
2024-05-07 08:55:35.3: Acquire data for Observation NGC_6544...
2024-05-07 08:55:35.3:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6544)
2024-05-07 08:55:35.3: Send Observation NGC_6544 to ACP Sequencer
2024-05-07 08:55:50.5: ** ACP script "AcquireScheduler" failed:
2024-05-07 08:55:50.5: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 08:55:50.5: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 08:55:50.5: ACP data acquisition failed for Observation NGC_6544.
2024-05-07 08:55:50.5:   (Observation NGC_6544 interrupted by acquisition process failure.)
2024-05-07 08:59:23.2: ++ Auto Focus ++
2024-05-07 08:59:23.2: Doing periodic autofocus.
2024-05-07 08:59:23.2: Start special ACP AutoFocus script for scheduler
2024-05-07 08:59:38.2: ** ACP script "AutoFocusScheduler" failed:
2024-05-07 08:59:38.2: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 79 column 9.

2024-05-07 08:59:38.2: ** Autofocus failed (n=15), will retry ASAP after 20 min.
2024-05-07 09:02:40.2: Dispatcher cycle time: 0.1 sec.
2024-05-07 09:02:40.2: Acquire data for Observation NGC_6642...
2024-05-07 09:02:40.2:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6642)
2024-05-07 09:02:40.2: Send Observation NGC_6642 to ACP Sequencer
2024-05-07 09:02:55.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 09:02:55.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 09:02:55.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 09:02:55.3: ACP data acquisition failed for Observation NGC_6642.
2024-05-07 09:02:55.3:   (Observation NGC_6642 interrupted by acquisition process failure.)
2024-05-07 09:02:55.5: Dispatcher cycle time: 0.1 sec.
2024-05-07 09:02:55.5: Acquire data for Observation CSS_J212625...
2024-05-07 09:02:55.5:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan CSS_J212625)
2024-05-07 09:02:55.5: Send Observation CSS_J212625 to ACP Sequencer
2024-05-07 09:03:32.6: ** ACP script "AcquireScheduler" failed:
2024-05-07 09:03:32.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 09:03:32.6: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 09:03:32.6: ACP data acquisition failed for Observation CSS_J212625.
2024-05-07 09:03:32.6:   (Observation CSS_J212625 interrupted by acquisition process failure.)
2024-05-07 09:03:32.7: Dispatcher cycle time: 0.0 sec.
2024-05-07 09:03:32.7: Acquire data for Observation CSS_J212625...
2024-05-07 09:03:32.7:   (belongs to Project AAVSO_MISC_SFY_AUTO_ver2706, Plan CSS_J212625)
2024-05-07 09:03:32.7: Send Observation CSS_J212625 to ACP Sequencer
2024-05-07 09:03:54.6: ** ACP script "AcquireScheduler" failed:
2024-05-07 09:03:54.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 09:03:54.6: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 09:03:54.6: ACP data acquisition failed for Observation CSS_J212625.
2024-05-07 09:03:54.6:   (Observation CSS_J212625 interrupted by acquisition process failure.)
2024-05-07 09:10:59.5: Dispatcher cycle time: 0.0 sec.
2024-05-07 09:10:59.5: Acquire data for Observation NGC_6626...
2024-05-07 09:10:59.5:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6626)
2024-05-07 09:10:59.5: Send Observation NGC_6626 to ACP Sequencer
2024-05-07 09:11:14.6: ** ACP script "AcquireScheduler" failed:
2024-05-07 09:11:14.6: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 09:11:14.6: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 09:11:14.6: ACP data acquisition failed for Observation NGC_6626.
2024-05-07 09:11:14.6:   (Observation NGC_6626 interrupted by acquisition process failure.)
2024-05-07 09:11:14.7: Dispatcher cycle time: 0.0 sec.
2024-05-07 09:11:14.7: Acquire data for Observation NGC_6553...
2024-05-07 09:11:14.7:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6553)
2024-05-07 09:11:14.7: Send Observation NGC_6553 to ACP Sequencer
2024-05-07 09:11:51.8: ** ACP script "AcquireScheduler" failed:
2024-05-07 09:11:51.8: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 09:11:51.8: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 09:11:51.8: ACP data acquisition failed for Observation NGC_6553.
2024-05-07 09:11:51.8:   (Observation NGC_6553 interrupted by acquisition process failure.)
2024-05-07 09:11:51.9: Dispatcher cycle time: 0.0 sec.
2024-05-07 09:11:51.9: Acquire data for Observation NGC_6656...
2024-05-07 09:11:51.9:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6656)
2024-05-07 09:11:52.0: Send Observation NGC_6656 to ACP Sequencer
2024-05-07 09:12:07.0: ** ACP script "AcquireScheduler" failed:
2024-05-07 09:12:07.0: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 09:12:07.0: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 09:12:07.0: ACP data acquisition failed for Observation NGC_6656.
2024-05-07 09:12:07.0:   (Observation NGC_6656 interrupted by acquisition process failure.)
2024-05-07 09:18:11.2: Dispatcher cycle time: 0.0 sec.
2024-05-07 09:18:11.2: Acquire data for Observation NGC_6717...
2024-05-07 09:18:11.2:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6717)
2024-05-07 09:18:11.2: Send Observation NGC_6717 to ACP Sequencer
2024-05-07 09:18:26.3: ** ACP script "AcquireScheduler" failed:
2024-05-07 09:18:26.3: **Script Error (Tracking has been stopped)**
Source:   ASCOM.SiTechDll.Telescope
Message:  sttgaSiTech Says: Motor(s) in Blinky Mode!
Location: line 2108 column 9.

2024-05-07 09:18:26.3: ACP ERROR: Run failed due to script error (see ACP run log)
2024-05-07 09:18:26.3: ACP data acquisition failed for Observation NGC_6717.
2024-05-07 09:18:26.3:   (Observation NGC_6717 interrupted by acquisition process failure.)
2024-05-07 09:19:04.0: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED**
2024-05-07 09:21:52.7: ++ Observatory Startup ++
2024-05-07 09:21:52.7: Weather safety is now disabled
2024-05-07 09:21:52.7: Start ACP Sequencer's StartupObs script
2024-05-07 09:23:08.2: Weather safety is re-enabled
2024-05-07 09:23:08.2: Weather safety is now disabled
2024-05-07 09:23:08.2: Open the observatory dome/roof
2024-05-07 09:24:09.2: Weather safety is re-enabled
2024-05-07 09:24:09.2: Observatory startup succeeded, and dome opened successfully
2024-05-07 09:24:09.2: Periodic AF schedule reset. Interval is now 1.0 hours
2024-05-07 09:24:09.2: Last AutoFocus was completed at 07-May-2024 04:02:23 UTC
2024-05-07 09:24:09.2: Autofocus will be done ASAP.
2024-05-07 09:24:09.2: ++ Auto Focus ++
2024-05-07 09:24:09.2: Doing periodic autofocus.
2024-05-07 09:24:09.2: Start special ACP AutoFocus script for scheduler
2024-05-07 09:29:50.4: Next periodic autofocus ASAP after 3600sec. 07-May-2024 10:29:36 UTC
2024-05-07 09:29:51.7: Dispatcher cycle time: 1.3 sec.
2024-05-07 09:29:51.7: Acquire data for Observation NGC_6638...
2024-05-07 09:29:51.7:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6638)
2024-05-07 09:29:51.7: Send Observation NGC_6638 to ACP Sequencer
2024-05-07 09:35:52.3: ACP data acquisition failed for Observation NGC_6638.
2024-05-07 09:35:52.3:   (Observation NGC_6638 interrupted by acquisition process failure.)
2024-05-07 09:35:52.4: Dispatcher cycle time: 0.0 sec.
2024-05-07 09:35:52.4: Acquire data for Observation NGC_7078...
2024-05-07 09:35:52.4:   (belongs to Project AAVSO_MISC_WEL_AUTO_ver3443, Plan NGC_7078)
2024-05-07 09:35:52.5: Send Observation NGC_7078 to ACP Sequencer
2024-05-07 09:39:52.1: ACP data acquisition failed for Observation NGC_7078.
2024-05-07 09:39:52.1:   (Observation NGC_7078 interrupted by acquisition process failure.)
2024-05-07 10:03:41.6: Dispatcher cycle time: 0.1 sec.
2024-05-07 10:03:41.6: Acquire data for Observation CGCS_5926...
2024-05-07 10:03:41.6:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan CGCS_5926)
2024-05-07 10:03:41.6: Send Observation CGCS_5926 to ACP Sequencer
2024-05-07 10:07:45.5: ACP data acquisition failed for Observation CGCS_5926.
2024-05-07 10:07:45.5:   (Observation CGCS_5926 interrupted by acquisition process failure.)
2024-05-07 10:07:45.7: Dispatcher cycle time: 0.1 sec.
2024-05-07 10:07:45.7: Acquire data for Observation NGC_7089...
2024-05-07 10:07:45.7:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_7089)
2024-05-07 10:07:45.7: Send Observation NGC_7089 to ACP Sequencer
2024-05-07 10:11:45.2: ACP data acquisition failed for Observation NGC_7089.
2024-05-07 10:11:45.2:   (Observation NGC_7089 interrupted by acquisition process failure.)
2024-05-07 10:11:45.4: Dispatcher cycle time: 0.1 sec.
2024-05-07 10:11:45.4: Acquire data for Observation DW_Cas...
2024-05-07 10:11:45.4:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan DW_Cas)
2024-05-07 10:11:45.4: Send Observation DW_Cas to ACP Sequencer
2024-05-07 10:22:22.8: ACP data acquisition failed for Observation DW_Cas.
2024-05-07 10:22:22.8:   (Observation DW_Cas interrupted by acquisition process failure.)
2024-05-07 10:22:23.0: Dispatcher cycle time: 0.1 sec.
2024-05-07 10:22:23.0: Acquire data for Observation NGC_6864...
2024-05-07 10:22:23.0:   (belongs to Project AAVSO_Pgc_Welch_AUTO_ver2411, Plan NGC_6864)
2024-05-07 10:22:23.0: Send Observation NGC_6864 to ACP Sequencer
2024-05-07 10:27:09.1: ACP data acquisition failed for Observation NGC_6864.
2024-05-07 10:27:09.1:   (Observation NGC_6864 interrupted by acquisition process failure.)
2024-05-07 10:27:09.3: Dispatcher cycle time: 0.1 sec.
2024-05-07 10:27:09.3: Acquire data for Observation V407_Cas...
2024-05-07 10:27:09.3:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan V407_Cas)
2024-05-07 10:27:09.3: Send Observation V407_Cas to ACP Sequencer
2024-05-07 10:38:14.4: ACP data acquisition failed for Observation V407_Cas.
2024-05-07 10:38:14.4:   (Observation V407_Cas interrupted by acquisition process failure.)
2024-05-07 10:38:14.5: ++ Auto Focus ++
2024-05-07 10:38:14.6: Doing periodic autofocus.
2024-05-07 10:38:14.6: Start special ACP AutoFocus script for scheduler
2024-05-07 10:41:53.2: ** Autofocus failed (n=1), will retry ASAP after 0 min.
2024-05-07 10:41:53.4: Dispatcher cycle time: 0.1 sec.
2024-05-07 10:41:53.4: Acquire data for Observation V0704_And...
2024-05-07 10:41:53.4:   (belongs to Project AAVSO_P253_CDAG_AUTO_ver3388, Plan V0704_And)
2024-05-07 10:41:53.4: ++ Auto Focus ++
2024-05-07 10:41:53.4: Doing periodic autofocus.
2024-05-07 10:41:53.4: Start special ACP AutoFocus script for scheduler
2024-05-07 10:49:06.4: ** Autofocus failed (n=2), will retry ASAP after 5 min.
2024-05-07 10:49:06.4: Send Observation V0704_And to ACP Sequencer
2024-05-07 10:53:06.1: ACP data acquisition failed for Observation V0704_And.
2024-05-07 10:53:06.1:   (Observation V0704_And interrupted by acquisition process failure.)
2024-05-07 10:53:06.3: Dispatcher cycle time: 0.1 sec.
2024-05-07 10:53:06.3: Acquire data for Observation V630_Cas...
2024-05-07 10:53:06.3:   (belongs to Project AAVSO_MISC_PYG_AUTO_ver3260, Plan V630_Cas)
2024-05-07 10:53:06.3: Send Observation V630_Cas to ACP Sequencer
2024-05-07 10:57:34.0: ACP data acquisition failed for Observation V630_Cas.
2024-05-07 10:57:34.0:   (Observation V630_Cas interrupted by acquisition process failure.)
2024-05-07 10:57:34.1: ++ Auto Focus ++
2024-05-07 10:57:34.1: Doing periodic autofocus.
2024-05-07 10:57:34.1: Start special ACP AutoFocus script for scheduler
2024-05-07 11:00:43.8: ** Autofocus failed (n=3), will retry ASAP after 10 min.
2024-05-07 11:00:43.9: Dispatcher cycle time: 0.1 sec.
2024-05-07 11:00:43.9: Acquire data for Observation KK_Cas...
2024-05-07 11:00:43.9:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan KK_Cas)
2024-05-07 11:00:43.9: Send Observation KK_Cas to ACP Sequencer
2024-05-07 11:05:58.8: ACP data acquisition failed for Observation KK_Cas.
2024-05-07 11:05:58.8:   (Observation KK_Cas interrupted by acquisition process failure.)
2024-05-07 11:05:59.0: Dispatcher cycle time: 0.1 sec.
2024-05-07 11:05:59.0: Acquire data for Observation V630_Cas...
2024-05-07 11:05:59.0:   (belongs to Project AAVSO_survey_HQ_AUTO_ver3479, Plan V630_Cas)
2024-05-07 11:05:59.0: Send Observation V630_Cas to ACP Sequencer
2024-05-07 11:08:12.8: ACP data acquisition failed for Observation V630_Cas.
2024-05-07 11:08:12.8:   (Observation V630_Cas interrupted by acquisition process failure.)
2024-05-07 11:08:13.0: Dispatcher cycle time: 0.1 sec.
2024-05-07 11:08:13.0: Acquire data for Observation DW_Cas...
2024-05-07 11:08:13.0:   (belongs to Project AAVSO_DCEP_HQA_AUTO_ver3479, Plan DW_Cas)
2024-05-07 11:08:13.0: Send Observation DW_Cas to ACP Sequencer
2024-05-07 11:14:19.7: ACP data acquisition failed for Observation DW_Cas.
2024-05-07 11:14:19.7:   (Observation DW_Cas interrupted by acquisition process failure.)
2024-05-07 11:14:19.8: ++ Auto Focus ++
2024-05-07 11:14:19.8: Doing periodic autofocus.
2024-05-07 11:14:19.8: Start special ACP AutoFocus script for scheduler
2024-05-07 11:17:09.1: ** Autofocus failed (n=4), will retry ASAP after 15 min.
2024-05-07 11:29:49.7: ++ Dawn Flats ++
2024-05-07 11:29:49.7: Start ACP AutoFlat script for Dawn flats