Log opened at Thu, Jan 13 2022 14:01:45 UTC (actual time) Current log level is Normal ACP Expert Scheduler Engine Version 8.3.2 Part of ACP Expert Release 8.3 Full license: Arne Henden 2022-01-13 14:01:45.9: REAL TIME internal clock initialized at 13-Jan-2022 14:01:45 UTC 2022-01-13 14:01:45.9: Dispatcher started at 13-Jan-2022 14:01:45 UTC 2022-01-13 14:01:46.3: Loaded Constraint plugin AirMass 2022-01-13 14:01:46.4: Loaded Constraint plugin AirmassRange 2022-01-13 14:01:46.4: Loaded Constraint plugin Horizon 2022-01-13 14:01:46.5: Loaded Constraint plugin HourAngle 2022-01-13 14:01:46.6: Loaded Constraint plugin MoonAvoid 2022-01-13 14:01:46.6: Loaded Constraint plugin MoonDown 2022-01-13 14:01:46.7: Loaded Constraint plugin SkyCondition 2022-01-13 14:01:46.7: Loaded Constraint plugin TimeRange 2022-01-13 14:01:47.6: 183 plans are now pending. 2022-01-13 14:01:47.8: Attach ACP sequencer 2022-01-13 14:01:55.5: Weather successfully connected. Wait for valid data... 2022-01-13 14:01:55.6: ==== Dispatcher is running in NORMAL (NIGHT) mode ==== 2022-01-13 14:01:55.6: Sequencer does sky flats 2022-01-13 14:02:00.7: ++ Weather Safe ++ 2022-01-13 14:02:01.2: HTTP command listener failed to start: Access is denied 2022-01-13 14:02:01.2: If this is Windows 8-10, you will need to add permission (ACL) to listen on port 9123. 2022-01-13 14:02:01.2: See Scheduler Help > Configuring the Program > Noteworthy Configuration Options, at the bottom. 2022-01-13 14:03:25.7: ++ Observatory Startup ++ 2022-01-13 14:03:25.7: Weather safety is now disabled 2022-01-13 14:03:25.7: Start ACP Sequencer's StartupObs script 2022-01-13 14:04:17.3: Weather safety is re-enabled 2022-01-13 14:04:17.3: Weather safety is now disabled 2022-01-13 14:04:17.3: Open the observatory dome/roof 2022-01-13 14:05:18.1: Weather safety is re-enabled 2022-01-13 14:05:18.1: Observatory startup succeeded, and dome opened successfully 2022-01-13 14:05:18.1: ++ Dawn Flats ++ 2022-01-13 14:05:18.3: Start ACP AutoFlat script for Dawn flats 2022-01-13 14:08:34.6: ** ACP script "AutoFlat" failed: 2022-01-13 14:08:34.6: **Script Error (Tracking has been stopped)** Source: Microsoft VBScript runtime error Message: Subscript out of range Probably an error in the flat plan Location: line 961 column 17. 2022-01-13 14:08:39.7: Weather safety is now disabled 2022-01-13 14:08:39.7: Close the observatory dome/roof. 2022-01-13 14:09:25.4: Weather safety is re-enabled 2022-01-13 14:09:25.4: ++ Morning Cal Frames ++ 2022-01-13 14:09:25.4: Weather safety is now disabled 2022-01-13 14:09:25.5: Weather safety is re-enabled 2022-01-13 14:09:25.5: Weather safety is now disabled 2022-01-13 14:09:25.5: Start ACP Sequencer's SchedulerCalFrames.txt observing plan 2022-01-13 14:10:46.5: Weather safety is re-enabled 2022-01-13 14:10:51.7: -- Observatory Shutdown -- 2022-01-13 14:10:51.7: Weather safety is now disabled 2022-01-13 14:10:51.7: Start ACP Sequencer's ShutdownObs script 2022-01-13 14:11:43.0: Weather safety is re-enabled 2022-01-14 01:37:17.1: ++ Observatory Startup ++ 2022-01-14 01:37:17.1: Weather safety is now disabled 2022-01-14 01:37:17.1: Start ACP Sequencer's StartupObs script 2022-01-14 01:38:04.9: Weather safety is re-enabled 2022-01-14 01:38:04.9: Weather safety is now disabled 2022-01-14 01:38:04.9: Open the observatory dome/roof 2022-01-14 01:39:20.7: Weather safety is re-enabled 2022-01-14 01:39:20.7: Observatory startup succeeded, and dome opened successfully 2022-01-14 01:39:20.7: ++ Auto Focus ++ 2022-01-14 01:39:20.7: Doing initial autofocus. 2022-01-14 01:39:20.7: Start special ACP AutoFocus script for scheduler 2022-01-14 01:46:08.0: ** Autofocus failed (n=1), will retry ASAP after 0 min. 2022-01-14 01:46:14.9: Plan EE_Cep has Monitor Mode. Time to resubmit it. 2022-01-14 01:46:19.5: Dispatcher cycle time: 11.5 sec. 2022-01-14 01:46:19.5: Acquire data for Observation PV_Cep... 2022-01-14 01:46:19.5: (belongs to Project AAVSO_MISC_SGUA_AUTO_ver2706, Plan PV_Cep) 2022-01-14 01:46:19.6: ++ Auto Focus ++ 2022-01-14 01:46:19.6: Doing periodic autofocus. 2022-01-14 01:46:19.6: Start special ACP AutoFocus script for scheduler 2022-01-14 01:52:53.0: Next periodic autofocus ASAP after 3600sec. 14-Jan-2022 02:52:21 UTC 2022-01-14 01:52:53.1: Send Observation PV_Cep to ACP Sequencer 2022-01-14 02:00:32.6: ACP data acquisition failed for Observation PV_Cep. 2022-01-14 02:00:32.6: (Observation PV_Cep interrupted by acquisition process failure.) 2022-01-14 02:00:34.5: Dispatcher cycle time: 1.8 sec. 2022-01-14 02:00:34.5: Acquire data for Observation EE_Cep... 2022-01-14 02:00:34.5: (belongs to Project AAVSO_P124_Staels_AUTO_ver2706, Plan EE_Cep) 2022-01-14 02:00:34.5: Send Observation EE_Cep to ACP Sequencer 2022-01-14 02:00:49.9: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:00:49.9: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:00:49.9: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:00:49.9: ACP data acquisition failed for Observation EE_Cep. 2022-01-14 02:00:49.9: (Observation EE_Cep interrupted by acquisition process failure.) 2022-01-14 02:00:51.9: Dispatcher cycle time: 1.8 sec. 2022-01-14 02:00:51.9: Acquire data for Observation SS_Cyg... 2022-01-14 02:00:51.9: (belongs to Project AAVSO_MISC_HQA_AUTO_ver2706, Plan SS_Cyg) 2022-01-14 02:00:51.9: Send Observation SS_Cyg to ACP Sequencer 2022-01-14 02:01:07.0: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:01:07.0: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:01:07.0: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:01:07.0: ACP data acquisition failed for Observation SS_Cyg. 2022-01-14 02:01:07.0: (Observation SS_Cyg interrupted by acquisition process failure.) 2022-01-14 02:01:08.9: Dispatcher cycle time: 1.8 sec. 2022-01-14 02:01:08.9: Acquire data for Observation GZ_Cet... 2022-01-14 02:01:09.0: (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan GZ_Cet) 2022-01-14 02:01:09.0: Send Observation GZ_Cet to ACP Sequencer 2022-01-14 02:01:31.9: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:01:31.9: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:01:32.0: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:01:32.0: ACP data acquisition failed for Observation GZ_Cet. 2022-01-14 02:01:32.0: (Observation GZ_Cet interrupted by acquisition process failure.) 2022-01-14 02:01:33.9: Dispatcher cycle time: 1.8 sec. 2022-01-14 02:01:33.9: Acquire data for Observation EE_Cep... 2022-01-14 02:01:33.9: (belongs to Project AAVSO_MISC_SBL_AUTO_ver2706, Plan EE_Cep) 2022-01-14 02:01:33.9: Send Observation EE_Cep to ACP Sequencer 2022-01-14 02:02:21.7: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:02:21.7: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:02:21.7: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:02:21.7: ACP data acquisition failed for Observation EE_Cep. 2022-01-14 02:02:21.7: (Observation EE_Cep interrupted by acquisition process failure.) 2022-01-14 02:02:23.5: Dispatcher cycle time: 1.6 sec. 2022-01-14 02:02:23.5: Acquire data for Observation V630_Cas... 2022-01-14 02:02:23.5: (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan V630_Cas) 2022-01-14 02:02:23.6: Send Observation V630_Cas to ACP Sequencer 2022-01-14 02:03:06.8: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:03:06.8: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:03:06.8: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:03:06.8: ACP data acquisition failed for Observation V630_Cas. 2022-01-14 02:03:06.8: (Observation V630_Cas interrupted by acquisition process failure.) 2022-01-14 02:03:08.6: Dispatcher cycle time: 1.7 sec. 2022-01-14 02:03:08.6: Acquire data for Observation DW_Cas... 2022-01-14 02:03:08.6: (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan DW_Cas) 2022-01-14 02:03:08.7: Send Observation DW_Cas to ACP Sequencer 2022-01-14 02:03:24.1: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:03:24.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:03:24.1: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:03:24.1: ACP data acquisition failed for Observation DW_Cas. 2022-01-14 02:03:24.1: (Observation DW_Cas interrupted by acquisition process failure.) 2022-01-14 02:03:25.7: Dispatcher cycle time: 1.5 sec. 2022-01-14 02:03:25.7: Acquire data for Observation KK_Cas... 2022-01-14 02:03:25.7: (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan KK_Cas) 2022-01-14 02:03:25.8: Send Observation KK_Cas to ACP Sequencer 2022-01-14 02:03:45.7: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:03:45.7: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:03:45.7: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:03:45.7: ACP data acquisition failed for Observation KK_Cas. 2022-01-14 02:03:45.7: (Observation KK_Cas interrupted by acquisition process failure.) 2022-01-14 02:03:48.0: Dispatcher cycle time: 2.2 sec. 2022-01-14 02:03:48.0: Acquire data for Observation CGCS_5926... 2022-01-14 02:03:48.0: (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan CGCS_5926) 2022-01-14 02:03:48.1: Send Observation CGCS_5926 to ACP Sequencer 2022-01-14 02:04:03.1: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:04:03.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:04:03.1: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:04:03.1: ACP data acquisition failed for Observation CGCS_5926. 2022-01-14 02:04:03.1: (Observation CGCS_5926 interrupted by acquisition process failure.) 2022-01-14 02:04:04.8: Dispatcher cycle time: 1.6 sec. 2022-01-14 02:04:04.8: Acquire data for Observation BO_Cep... 2022-01-14 02:04:04.9: (belongs to Project AAVSO_MISC_HQA_AUTO_ver2706, Plan BO_Cep) 2022-01-14 02:04:04.9: Send Observation BO_Cep to ACP Sequencer 2022-01-14 02:04:20.3: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:04:20.3: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:04:20.3: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:04:20.3: ACP data acquisition failed for Observation BO_Cep. 2022-01-14 02:04:20.3: (Observation BO_Cep interrupted by acquisition process failure.) 2022-01-14 02:04:22.0: Dispatcher cycle time: 1.5 sec. 2022-01-14 02:04:22.0: Acquire data for Observation V407_Cas... 2022-01-14 02:04:22.0: (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan V407_Cas) 2022-01-14 02:04:22.1: Send Observation V407_Cas to ACP Sequencer 2022-01-14 02:04:39.6: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:04:39.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:04:39.6: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:04:39.7: ACP data acquisition failed for Observation V407_Cas. 2022-01-14 02:04:39.7: (Observation V407_Cas interrupted by acquisition process failure.) 2022-01-14 02:04:42.1: Dispatcher cycle time: 2.3 sec. 2022-01-14 02:04:42.1: Acquire data for Observation GZ_Cet... 2022-01-14 02:04:42.1: (belongs to Project AAVSO_MISC_HQA_AUTO_ver2706, Plan GZ_Cet) 2022-01-14 02:04:42.1: Send Observation GZ_Cet to ACP Sequencer 2022-01-14 02:04:58.6: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:04:58.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:04:58.6: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:04:58.6: ACP data acquisition failed for Observation GZ_Cet. 2022-01-14 02:04:58.6: (Observation GZ_Cet interrupted by acquisition process failure.) 2022-01-14 02:05:00.2: Dispatcher cycle time: 1.4 sec. 2022-01-14 02:05:00.2: Acquire data for Observation AZ_Cas... 2022-01-14 02:05:00.2: (belongs to Project AAVSO_MISC_HQA_AUTO_ver2706, Plan AZ_Cas) 2022-01-14 02:05:00.2: Send Observation AZ_Cas to ACP Sequencer 2022-01-14 02:05:48.3: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:05:48.3: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:05:48.3: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:05:48.3: ACP data acquisition failed for Observation AZ_Cas. 2022-01-14 02:05:48.3: (Observation AZ_Cas interrupted by acquisition process failure.) 2022-01-14 02:05:49.8: Dispatcher cycle time: 1.3 sec. 2022-01-14 02:05:49.8: Acquire data for Observation V630_Cas... 2022-01-14 02:05:49.8: (belongs to Project AAVSO_MISC_PYG_AUTO_ver2706, Plan V630_Cas) 2022-01-14 02:05:49.9: Send Observation V630_Cas to ACP Sequencer 2022-01-14 02:06:38.8: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:06:38.8: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:06:38.8: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:06:38.8: ACP data acquisition failed for Observation V630_Cas. 2022-01-14 02:06:38.8: (Observation V630_Cas interrupted by acquisition process failure.) 2022-01-14 02:06:40.3: Dispatcher cycle time: 1.3 sec. 2022-01-14 02:06:40.3: Acquire data for Observation TT_Ari... 2022-01-14 02:06:40.3: (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan TT_Ari) 2022-01-14 02:06:40.3: Send Observation TT_Ari to ACP Sequencer 2022-01-14 02:06:55.6: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:06:55.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:06:55.6: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:06:55.6: ACP data acquisition failed for Observation TT_Ari. 2022-01-14 02:06:55.6: (Observation TT_Ari interrupted by acquisition process failure.) 2022-01-14 02:06:57.2: Dispatcher cycle time: 1.5 sec. 2022-01-14 02:06:57.2: Acquire data for Observation DW_Cas... 2022-01-14 02:06:57.2: (belongs to Project AAVSO_DCEP_HQA_AUTO_ver2706, Plan DW_Cas) 2022-01-14 02:06:57.3: Send Observation DW_Cas to ACP Sequencer 2022-01-14 02:07:50.7: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:07:50.7: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:07:50.7: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:07:50.7: ACP data acquisition failed for Observation DW_Cas. 2022-01-14 02:07:50.7: (Observation DW_Cas interrupted by acquisition process failure.) 2022-01-14 02:07:52.1: Dispatcher cycle time: 1.3 sec. 2022-01-14 02:07:52.1: Acquire data for Observation V1112_Per... 2022-01-14 02:07:52.1: (belongs to Project AAVSO_P167_HGUA_AUTO_ver2706, Plan V1112_Per) 2022-01-14 02:07:52.2: Send Observation V1112_Per to ACP Sequencer 2022-01-14 02:08:45.8: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:08:45.8: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:08:45.8: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:08:45.8: ACP data acquisition failed for Observation V1112_Per. 2022-01-14 02:08:45.8: (Observation V1112_Per interrupted by acquisition process failure.) 2022-01-14 02:08:47.4: Dispatcher cycle time: 1.4 sec. 2022-01-14 02:08:47.4: Acquire data for Observation KK_Cas... 2022-01-14 02:08:47.4: (belongs to Project AAVSO_DCEP_HQA_AUTO_ver2706, Plan KK_Cas) 2022-01-14 02:08:47.5: Send Observation KK_Cas to ACP Sequencer 2022-01-14 02:09:13.6: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:09:13.6: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:09:13.6: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:09:13.6: ACP data acquisition failed for Observation KK_Cas. 2022-01-14 02:09:13.6: (Observation KK_Cas interrupted by acquisition process failure.) 2022-01-14 02:09:15.1: Dispatcher cycle time: 1.3 sec. 2022-01-14 02:09:15.1: Acquire data for Observation CGCS_5926... 2022-01-14 02:09:15.1: (belongs to Project AAVSO_MISC_HQA_AUTO_ver2706, Plan CGCS_5926) 2022-01-14 02:09:15.1: Send Observation CGCS_5926 to ACP Sequencer 2022-01-14 02:09:41.3: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:09:41.3: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:09:41.3: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:09:41.4: ACP data acquisition failed for Observation CGCS_5926. 2022-01-14 02:09:41.4: (Observation CGCS_5926 interrupted by acquisition process failure.) 2022-01-14 02:09:42.7: Dispatcher cycle time: 1.2 sec. 2022-01-14 02:09:42.7: Acquire data for Observation V407_Cas... 2022-01-14 02:09:42.7: (belongs to Project AAVSO_DCEP_HQA_AUTO_ver2706, Plan V407_Cas) 2022-01-14 02:09:42.8: Send Observation V407_Cas to ACP Sequencer 2022-01-14 02:10:00.9: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:10:00.9: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:10:00.9: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:10:00.9: ACP data acquisition failed for Observation V407_Cas. 2022-01-14 02:10:00.9: (Observation V407_Cas interrupted by acquisition process failure.) 2022-01-14 02:10:02.4: Dispatcher cycle time: 1.4 sec. 2022-01-14 02:10:02.4: Acquire data for Observation B0133+47... 2022-01-14 02:10:02.4: (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan B0133+47) 2022-01-14 02:10:02.5: Send Observation B0133+47 to ACP Sequencer 2022-01-14 02:10:17.7: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:10:17.7: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:10:17.7: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:10:17.7: ACP data acquisition failed for Observation B0133+47. 2022-01-14 02:10:17.7: (Observation B0133+47 interrupted by acquisition process failure.) 2022-01-14 02:10:19.0: Dispatcher cycle time: 1.1 sec. 2022-01-14 02:10:19.0: Acquire data for Observation EG_And... 2022-01-14 02:10:19.0: (belongs to Project AAVSO_MISC_SBL_AUTO_ver2706, Plan EG_And) 2022-01-14 02:10:19.1: Send Observation EG_And to ACP Sequencer 2022-01-14 02:10:34.1: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:10:34.1: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:10:34.1: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:10:34.1: ACP data acquisition failed for Observation EG_And. 2022-01-14 02:10:34.1: (Observation EG_And interrupted by acquisition process failure.) 2022-01-14 02:10:35.4: Dispatcher cycle time: 1.1 sec. 2022-01-14 02:10:35.4: Acquire data for Observation TU_Cas... 2022-01-14 02:10:35.4: (belongs to Project AAVSO_MISC_HQA_AUTO_ver2706, Plan TU_Cas) 2022-01-14 02:10:35.4: Send Observation TU_Cas to ACP Sequencer 2022-01-14 02:10:55.9: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:10:55.9: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:10:55.9: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:10:55.9: ACP data acquisition failed for Observation TU_Cas. 2022-01-14 02:10:55.9: (Observation TU_Cas interrupted by acquisition process failure.) 2022-01-14 02:10:57.3: Dispatcher cycle time: 1.2 sec. 2022-01-14 02:10:57.3: Acquire data for Observation V370_And... 2022-01-14 02:10:57.3: (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan V370_And) 2022-01-14 02:10:57.3: Send Observation V370_And to ACP Sequencer 2022-01-14 02:11:12.4: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:11:12.4: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:11:12.4: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:11:12.4: ACP data acquisition failed for Observation V370_And. 2022-01-14 02:11:12.4: (Observation V370_And interrupted by acquisition process failure.) 2022-01-14 02:11:13.7: Dispatcher cycle time: 1.1 sec. 2022-01-14 02:11:13.7: Acquire data for Observation TT_Ari... 2022-01-14 02:11:13.7: (belongs to Project AAVSO_MISC_HQA_AUTO_ver2706, Plan TT_Ari) 2022-01-14 02:11:13.8: Send Observation TT_Ari to ACP Sequencer 2022-01-14 02:11:28.8: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:11:28.8: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:11:28.8: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:11:28.8: ACP data acquisition failed for Observation TT_Ari. 2022-01-14 02:11:28.8: (Observation TT_Ari interrupted by acquisition process failure.) 2022-01-14 02:11:30.1: Dispatcher cycle time: 1.1 sec. 2022-01-14 02:11:30.1: Acquire data for Observation AZ_Cas... 2022-01-14 02:11:30.1: (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan AZ_Cas) 2022-01-14 02:11:30.1: Send Observation AZ_Cas to ACP Sequencer 2022-01-14 02:12:02.0: ** ACP script "AcquireScheduler" failed: 2022-01-14 02:12:02.0: **Script Error (Tracking has been stopped)** Source: ASCOM.SiTechDll.Telescope Message: sttgaSiTech Says: Motor(s) in Blinky Mode! Location: line 2094 column 9. 2022-01-14 02:12:02.0: ACP ERROR: Run failed due to script error (see ACP run log) 2022-01-14 02:12:02.0: ACP data acquisition failed for Observation AZ_Cas. 2022-01-14 02:12:02.0: (Observation AZ_Cas interrupted by acquisition process failure.) 2022-01-14 02:12:03.2: Dispatcher cycle time: 1.0 sec. 2022-01-14 02:12:03.2: Acquire data for Observation V504_Per... 2022-01-14 02:12:03.2: (belongs to Project AAVSO_survey_HQ_AUTO_ver2706, Plan V504_Per) 2022-01-14 02:12:03.2: Send Observation V504_Per to ACP Sequencer 2022-01-14 02:12:18.3: **EXCEPTION IN SCHEDULER: 2022-01-14 02:12:18.3: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED)) 2022-01-14 02:12:18.5: Traceback: at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args) at DC3.Scheduler.ACPSequencer.RunScript(String scrPath, String param) at DC3.Scheduler.ACPSequencer.AcquireData(Observation Obs) at DC3.Scheduler.Engine.DoSchedulePass() at DC3.Scheduler.Engine.Run() 2022-01-14 02:12:18.5: DOME/ROOF FAILURE: In addition, attempting to close your dome/roof this error occurred: 2022-01-14 02:12:18.5: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED)) 2022-01-14 02:12:18.5: No operator intervention command tool specified